New here, howdy all

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AlanTN

Junior Member
Joined
Mar 3, 2018
Posts
12
Reaction score
5
Location
Middle TN
First Name
Alan
Truck Year
1985
Truck Model
K10
Engine Size
350
Hey everyone, just got another square body today. Haven't had one in a while. Got a 1985 GMC. Had been looking for a good 85 body for years that I could afford, finally found one today.
Got a couple small rust spots in easy spots - quarter size at the driver side corner, tailgate at handle, and pass. door has some bondo on it. Good truck, 350 runs smooth as hell, better than most I've owned.
Seems to have some recent interior work done to her- seat, panels and dash, new carpet also.

Basic plans at this point will be to get rid of the skyjacker lift kit, maybe keep it at 2" lift or even stock, it's too high for my tastes as is, also my wife says my you-know-what got smaller when I bought it.
-Get a SM465 and NP205 in it. Currently has the 3spd with OD, which is just garbage.

Oh, also if anyone is looking for a skyjacker lift kit around TN, let me know. Will be taking this one off soon, would trade for stock or near stock suspension, and if anyone local has a SM465 I got cash for ya.

Anyways, glad to have a reason to be here. Finally found a decent '85
-Alan

You must be registered for see images attach

You must be registered for see images attach
 

Paladin

"Teufelshunde"
Joined
Jan 1, 2018
Posts
1,726
Reaction score
6,066
Location
Wichita Falls, Texas
First Name
Mike
Truck Year
1985
Truck Model
C30 Silverado Crew Cab Dually
Engine Size
468
Welcome from Texas! looks like a nice ride!
 

AlanTN

Junior Member
Joined
Mar 3, 2018
Posts
12
Reaction score
5
Location
Middle TN
First Name
Alan
Truck Year
1985
Truck Model
K10
Engine Size
350
Thanks fellas, glad to be here.
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,706
Reaction score
17,968
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
Welcome from Jawja! Nice lookin' truck.
 

Charlie

Mopar by Birth. Chevy by Choice.
Joined
Aug 2, 2017
Posts
1,837
Reaction score
912
Location
Euless, Texas
First Name
Don
Truck Year
1974
Truck Model
Cheyenne 10 LWB
Engine Size
350/TH350/AC/4 BBL Quadrajet
:welcome:
 

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,828
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
Welcome nice looking truck.



Yes guys I see it has bumper thingys. :321:
 

AlanTN

Junior Member
Joined
Mar 3, 2018
Posts
12
Reaction score
5
Location
Middle TN
First Name
Alan
Truck Year
1985
Truck Model
K10
Engine Size
350
Hell, are bumper thingys bad?

Thanks everyone
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,170
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
Welcome to the site. Sounds like you have a great starting point to begin with. Gotta wonder why the dislike for the manual with overdrive though? Not knocking your choice for the 465, it's a great trans, If my mill didn't wind out at 3500rpm, I'd be installing one of those instead of the np833.

When you do get rid of it (if that is what you decide) don't sell yourself short on it. It's a rare trans and there are more than a few people who would be interested in it.
 

echo7bravo

Full Access Member
Joined
Jan 19, 2018
Posts
333
Reaction score
292
Location
Alabama
First Name
Adam
Truck Year
1986
Truck Model
K-10 stepside
Engine Size
350/Th400, 4.56 with 35" BFG MT
Welcome! Great looking truck. Clean. And interior looks great. If you do end up changing out for a different transmission, it may help your gas mileage. But, The one you have is a pretty good setup.
 

AlanTN

Junior Member
Joined
Mar 3, 2018
Posts
12
Reaction score
5
Location
Middle TN
First Name
Alan
Truck Year
1985
Truck Model
K10
Engine Size
350
The trans in it is bad, and a little bit foreign to me, used to the reverse being on the other side. But, mostly I have been a lover of the muncie with the granny gear for so long I can't accept anything else.

The trans in it currently is bad. Won't go into 1st or reverse. Figured I would just put the old tried and true in it
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,170
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
The trans in it is bad, and a little bit foreign to me, used to the reverse being on the other side. But, mostly I have been a lover of the muncie with the granny gear for so long I can't accept anything else.

The trans in it currently is bad. Won't go into 1st or reverse. Figured I would just put the old tried and true in it
Fair enough, if your current trans is bad, you have no choice but to correct the situation. That 465 is a great trans. You really can't go wrong with something that was used in heavy trucks for that many years. Having something that is bullet proof, can ease the mind. But, like I mentioned above, your current set-up is not junk out of hand. It is essentially the same trans that Dodge used behind it's big blocks in the muscle cars.
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,914
Reaction score
4,115
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
Welcome.
 

WFO

Full Access Member
Joined
Jan 6, 2017
Posts
3,673
Reaction score
5,014
Location
Texas Panhandle
First Name
Dan
Truck Year
1986
Truck Model
K20
Engine Size
350
Welcome from the Texas Panhandle.
 

Latest posts

Forum statistics

Threads
44,057
Posts
948,514
Members
36,124
Latest member
dabsRus420
Top