LS Swapped No Communication With ECM
- Thread starter JSTEWY
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
dougbert
Full Access Member
- Joined
- Nov 2, 2015
- Posts
- 659
- Reaction score
- 175
- Location
- 5535 feet in Utah Mountains
- First Name
- doug
- Truck Year
- 1984
- Truck Model
- K1500/nv4500/np241c/33x12.50x16/4.10 Gears 14BFF
- Engine Size
- 5.3L - 2002 Silverado, rebuilt top end, long tube headers
is this IN the vehicle?
if so, you might make a separate harness for desktop programming, or use it for more reference
http://www.gmtruckcentral.com/articles/2014/Bench-harness/bench-harness.html
Next try another ECU
if so, you might make a separate harness for desktop programming, or use it for more reference
http://www.gmtruckcentral.com/articles/2014/Bench-harness/bench-harness.html
Next try another ECU
marks86
Full Access Member
- Joined
- Feb 2, 2011
- Posts
- 1,513
- Reaction score
- 90
- Location
- Latham, NY
- First Name
- Mark
- Truck Year
- 1986
- Truck Model
- K30
- Engine Size
- 12v Cummins
Vats been removed?
yevgenievich
Full Access Member
- Joined
- Mar 1, 2014
- Posts
- 4,820
- Reaction score
- 3,401
- Location
- Place
- First Name
- Name
- Truck Year
- Year
- Truck Model
- Model
- Engine Size
- Size
It needs ignition source 12v wires and constant 12v source. The desktop harness link should have the info needed regarding pins
