LS swap parts list

[Deek50]

thought this parts list might help any one looking to do an LS swap. Here is the parts list i have so far for my 1975 K20 LS swap not sure if I am going to use the cam listed or not but it is a good place holder.

LS Swap Flat bed
Part	Part Number	Vendor	Price	Purchased
GM 6.0 L 2003	LQ4	Pick and pull 50% off day	$ 207.00	X
Fuel tank 20 Gal. X2	Spectra GM1C	Amazon	$ 221.50	X
Sending unit driver side	Spectra FG05M	auto zone
Sending unit passanger side	Spectra FG05N	auto zone
12"clutch kit	Duralast Clutch NU1909	auto zone	$ 266.45	X
In Tank Fuel Pump X2	Areomotive 11569(340 Series)	Amazon	$ 265.30	X
Bell Housing Bolts	ICT Billet	Amazon
Master Adapter Set	ICT Billet	Amazon	$ 57.48	X
Fuel fittings
ECU flash	HP tuners	HP tuners	$ 100.00
flywheel for use with SM465	Sachs NFW1050	Rockauto	$ 116.30	X
Flywheel bolts	ITC Billet	Amazon
Pilot Bearing	GM CT1082	Amazon
Pressure plate bolts	ARP 1342201	Amazon	$ 57.09	X
Brake Booster Vacuum Hose Connector	GM12559760	Amazon	$ 9.50	X
Camshaft	Sloppy Mechanice "best cam"	Sloppy Mechanics	$ 265.00	X
Valve Springs	PAC-1218	Glenns auto preformance	$ 149.99	X
Fuel tank paint black	Local painter	Brad park(Devilry Customs)	$ 160.00	X
Clutch Master Cylender	Wilwood 260-15098	Amazon	$ 65.06	X
Hydraulic throwout bearing	RAM 78125	Summit		X
clutch Hydraulic hoses	Allstar Performance ALL46304-42	Summit	$ 174.67	X
Nylon Fuel line 3/8 25ft	FLRN-625	Zoro
Nylon Fuel line 5/16 25ft	FLRN-525	Zoro
3/8 fuel line clamps	FLRC-2982	Zoro
5/16 fuel line clamps	FLRC-2980	Zoro
Fuel line adapter 3/8 steel to 3/8 Nylon2 per bag)	FLRL-075	Zoro
Heat Shield sleeve	FLRT-14005	Zoro	$ 112.34	X
		Total Cost	$ 2,227.68

 

[Bextreme04]

If you want a great cam with a decent budget, you can send the stock cam to Delta Camshaft in Tacoma, Wa and they will regrind it to whatever spec you want. They have been doing it forever. Just call them and tell them what you are doing and what you want out of it and they will recommend a grind and do it for you. My l29 roller cam was $140 shipped and I had it back in less than 2 weeks from when I mailed it out.

 

[born2Run83]

This is a great budget build! I went through Texas Speed for my 224R Cam and valvetrain etc. Engine came from LKQ Online. How many miles does your LQ4 have on it? It’s interesting you did this spreadsheet. It’s literally almost identical to the one I made to keep track of parts needed/bought and prices and vendors lol

 

[Deek50]

Parts List update

Cracksaft seal Front	GM29602	Rockauto		X
Oil Pan Gasket	GM12612350	Rockauto		X
Timing Cover Gasket	GM12633904	Rockauto		X
Water Pump Gaskets X2	GM251663	Rockauto		X
Rear cover Gasket	GM12639249	Rockauto		X
Oil Galley Plug	GM12573460	Rockauto		X
Exhaust Manifold gasket	GM12617944	Rockauto		X
3/8 Nylon to quick disconect	FLRQ020	Rockauto		X
5/16 Nylon to quick disconect	FLRQ040	Rockauto		X
Cranckshaft seal rear	GM89060436	Rockauto	$ 180.28	X

Not sure How Many miles on the LQ4, I will update when I check the ECM
Think I might try a summit truck cam. I do plan o putting a turbo on the motor it will receive an HX35 with a V-band Hot side from Turbo Labs of America.