Is this fender original or aftermarket?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Toad455

Full Access Member
Joined
Aug 3, 2023
Posts
118
Reaction score
79
Location
North Texas
First Name
Kevin
Truck Year
1978
Truck Model
C10
Engine Size
6.0
It's really not that big of a deal, but a friend gave me a drivers side fender over 20 years ago and I stored it away. It "appeared" to be an original since I blasted what seemed like the original paint off down to the metal and sprayed it with epoxy. I'm just now getting around to fitting it on and it seems like an aftermarket. The pic on the left is the one in question, the nuts are welded on the inside. The pic on the right is from an NOS pass side fender I just bought, these nuts match the nuts on the original fenders exact. So does anyone know if these nuts can be used to identify original GM fenders? Or do some look like the pic on the left? These holes are on the fenders inner panel. If aftermarket I will keep looking for another original. Thanks.
 

Attachments

  • Fender 1.jpg
    Fender 1.jpg
    39.8 KB · Views: 26
  • Fender 2.jpg
    Fender 2.jpg
    55.9 KB · Views: 29

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,542
Reaction score
6,636
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
Yes the one on the left is aftermarket.

GM replacement fenders should also have GM stamped on the rear of the fender that faces the door.
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,542
Reaction score
6,636
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins

Toad455

Full Access Member
Joined
Aug 3, 2023
Posts
118
Reaction score
79
Location
North Texas
First Name
Kevin
Truck Year
1978
Truck Model
C10
Engine Size
6.0
Thanks, I was figuring it was aftermarket. I wish I knew that before I blasted and primed it but oh well. I've heard of the GM stamp but even my originals don't have it unless I'm just not seeing it. We've had the truck since new so I do know they are original. Where do I find the thread you mentioned? Thanks again.
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,542
Reaction score
6,636
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
My understanding is only the GM replacement fenders have the GM stamp, the original fenders I have had in my hands have not had the stamp.

If you click the blue text in my post above, or there is a link down in my signature that will take you to that thread.
 

Toad455

Full Access Member
Joined
Aug 3, 2023
Posts
118
Reaction score
79
Location
North Texas
First Name
Kevin
Truck Year
1978
Truck Model
C10
Engine Size
6.0
My understanding is only the GM replacement fenders have the GM stamp, the original fenders I have had in my hands have not had the stamp.

If you click the blue text in my post above, or there is a link down in my signature that will take you to that thread.

Do you know how to identify an OEM hood from aftermarket? I don't see any info on this. I see they are reproducing the smooth front 73-78 hood now, which is what I'm looking for. I saw and like your write-up regarding fenders, just wondering if you know how to distinguish the hoods. Thanks.
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,542
Reaction score
6,636
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
As far as the hoods go, and the 73-78 hoods in particular I am not sure of any earmarks to differentiate OE vs aftermarket. However they only have been making them for maybe five years or so, so I'd doubt there are a ton of aftermarket ones out there. At least compared to 79-80 (both OEM and aftermarket) and OE 73-78 hoods.

Andy @bucket I think can shed some light on some of the differences between the 73-78 hoods. I believe its something to do with the latches (and latch holes) and I think the early (like 73-74) hoods lack an extra relief to help the hood fold in a wreck.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,498
Reaction score
28,497
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
As far as the hoods go, and the 73-78 hoods in particular I am not sure of any earmarks to differentiate OE vs aftermarket. However they only have been making them for maybe five years or so, so I'd doubt there are a ton of aftermarket ones out there. At least compared to 79-80 (both OEM and aftermarket) and OE 73-78 hoods.

Andy @bucket I think can shed some light on some of the differences between the 73-78 hoods. I believe its something to do with the latches (and latch holes) and I think the early (like 73-74) hoods lack an extra relief to help the hood fold in a wreck.

Yes, the '77 hood had a provision for the safety catch that was used with the optional inside hood release. Then the '78 hood had that provision, along with a provision for mounting a hood/cowl crash interlock at the rear of the hood. I had forgotten about the '73-'74 hoods potentially being different, I've got one I'll take a look at.

I was also unaware that the '73-'78 hood was now reproduced. I've gotta get some newer catalogs...
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,542
Reaction score
6,636
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
I managed to find some pictures of hood undersides on some BaT listings

1973
You must be registered for see images attach

1974
You must be registered for see images attach

And my 76 with its original hood
You must be registered for see images attach
 

Toad455

Full Access Member
Joined
Aug 3, 2023
Posts
118
Reaction score
79
Location
North Texas
First Name
Kevin
Truck Year
1978
Truck Model
C10
Engine Size
6.0
Yes, the '77 hood had a provision for the safety catch that was used with the optional inside hood release. Then the '78 hood had that provision, along with a provision for mounting a hood/cowl crash interlock at the rear of the hood. I had forgotten about the '73-'74 hoods potentially being different, I've got one I'll take a look at.

I was also unaware that the '73-'78 hood was now reproduced. I've gotta get some newer catalogs...
73-78 repro has not been out that long. I bought one from Holley, it looks nice and is not flimsy but I can't try the fit until I get the cab back on the frame and mount the fenders, support, etc.
 

Toad455

Full Access Member
Joined
Aug 3, 2023
Posts
118
Reaction score
79
Location
North Texas
First Name
Kevin
Truck Year
1978
Truck Model
C10
Engine Size
6.0
Yes the one on the left is aftermarket.

GM replacement fenders should also have GM stamped on the rear of the fender that faces the door.


Here's an update: I just got my AMD fender and it actually has the 8 nuts in the front that are pressed/staked in similar to the original. Here's a few pics of the new one and the original. It fits pretty good, but I'll have to "body work" the gap at the door to fender, it's good at the top and bottom but .110 wider in the middle, you can see into the hinge area too much for my liking. The thickness measures the same as the original as far as I can tell, hard to find a good place to check with calipers, plus the original has paint, surface rust, etc. I can't check the fitment 100% yet since it's just on with two bolts but I believe it'll be fine.
 

Attachments

  • AMD 1.jpg
    AMD 1.jpg
    96.2 KB · Views: 6
  • AMD 2.jpg
    AMD 2.jpg
    126.7 KB · Views: 6
  • AMD 3.jpg
    AMD 3.jpg
    89.3 KB · Views: 6
  • AMD 4.jpg
    AMD 4.jpg
    49.8 KB · Views: 6
  • AMD 5.jpg
    AMD 5.jpg
    98.6 KB · Views: 6

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,304
Reaction score
3,357
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
Yes, the '77 hood had a provision for the safety catch that was used with the optional inside hood release. Then the '78 hood had that provision, along with a provision for mounting a hood/cowl crash interlock at the rear of the hood. I had forgotten about the '73-'74 hoods potentially being different, I've got one I'll take a look at.

I was also unaware that the '73-'78 hood was now reproduced. I've gotta get some newer catalogs...
don't forget my buddy I found on craigslist.
 

Latest posts

Forum statistics

Threads
44,267
Posts
953,157
Members
36,458
Latest member
chemo
Top