I'am Going To Build A Smooth Idle 427

[Mark Jones]

I know who you are!!. seen you all over the internet. Nice to see you come on this board to advertise. You are the #1 big block builder for bringing every bit of power out of a big block
without breaking the bank. Your builds are incredible in my book.

Thanks, you might not know but I'am moving to Georgetown Tx
I came here because of this:

You must be registered for see images attach

 

[Mark Jones]

For not looking to make all the power in the world, that engine is nothing to laugh at.
Over 500 ft/lbs from somewhere in the 2000's and 493 horsepower is damn fine for a "smooth idle" engine built with some old stock GM parts.

I am sure there is loads of knowledge that helps when putting the parts together that helps as well...

Nice work sir.
Damn nice.

Thanks Catbox, I will let you know how it runs at the track!

 

[Nasty-LSX]

Thanks, you might not know but I'am moving to Georgetown Tx
I came here because of this:

You must be registered for see images attach

Im in Houston. If you move to George town. I will bring you my block in person. I have read and
seen all your youtube vids.. Very impressive!!

 

[QBuff02]

This is probably one of the cleanest engine builds I have ever seen! I have the Holley version of that intake manifold that I pulled off my engine from it's cheater stock pulling days. Thinking about saving it for a rainy day project. Pretty impressive numbers out of your build!

 

[Mark Jones]

This is probably one of the cleanest engine builds I have ever seen! I have the Holley version of that intake manifold that I pulled off my engine from it's cheater stock pulling days. Thinking about saving it for a rainy day project. Pretty impressive numbers out of your build!

Thanks for the nice comments. If you like the 427 build you will really like this one:
vortecpro-454-peanut-port-engine-build-and-drag-test.794225

 

[82sbshortbed]

Thanks for the nice comments. If you like the 427 build you will really like this one:
vortecpro-454-peanut-port-engine-build-and-drag-test.794225

Nice run!

 

[Bextreme04]

Thanks for the nice comments. If you like the 427 build you will really like this one:
vortecpro-454-peanut-port-engine-build-and-drag-test.794225

wow... what a great read! Looking forward to seeing more, I'm putting together my first big block right now and that chevelle is exactly my dream car.

 

[Catbox]

Thanks for the nice comments. If you like the 427 build you will really like this one:
vortecpro-454-peanut-port-engine-build-and-drag-test.794225

Now I have a bunch of reading to do.
I have read your stuff before and I like it.

I will be putting a set of L-29 heads on the 454 in my truck in the near future.
First I have to either do a ****** rework on them in the garage or have a machine shop go through them if they are beyond a quick and dirty cleanup.

 

[DoubleDingo]

Excellent!

 

[Mark Jones]

This is where the rubber meets the road, smooth idle 427 track test Saturday............

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach