I need a transfer case

[Wesley1776]

Hey guys,
I have a 78 k10 that I want to swap out the np203 for a 205 or 208. I can't find any on Craigslist. Does anyone have one they'd be willing to part with that's in or near georgia?

Thanks,
Wesley

 

[HotRodPC]

I'd imagine it's a 27 spline input you need, but I'd specify that for sure. What transmission are you trying to mate to?

 

[MrMarty51]

I have a 205 that is setup for a TH350 or 700R4, shipping`d be the deal killer though.

 

[yevgenievich]

About $100 shipping via fedex. Cost me $120 to ship a t56 transmission couple of years back.

 

[Oldrider]

If you are building a giant killer, you need the 205. You will need to specify the transmission you have.

 

[Honky Kong jr]

Lol all depends on what your gonna do with the truck. If your gonna play on the rocks take the 203 and make a doubler out of it for a 205. Mud I see plenty of 208s holding up. I've seen trans brake launches threw 208s so again it all depends on what you wanna do.

 

[HotRodPC]

That doubler deal is quite pricey. The adapter to join the 2 cases, then the cutting and balancing of driveshafts. It's worthy though if you're a serious wheeler. If you triple stick it, a stick for your doubler of the low range in the NP203, then double stick the NP205 for high and low, and for front or rear shaft activation, then you have **** ton of options, even FWD only to make a sharp turn on a front dig.

Front Dig Demo

xc_hide_links_from_guests_guests_error_hide_media

 

[Honky Kong jr]

That doubler deal is quite pricey. The adapter to join the 2 cases, then the cutting and balancing of driveshafts. It's worthy though if you're a serious wheeler. If you triple stick it, a stick for your doubler of the low range in the NP203, then double stick the NP205 for high and low, and for front or rear shaft activation, then you have **** ton of options, even FWD only to make a sharp turn on a front dig.

Front Dig Demo

xc_hide_links_from_guests_guests_error_hide_media

This can be done with a D20 also. Which I'd be using if the front shaft angle wouldn't have been so retarded.

 

[hiltijoe]

I have a 205 that is setup for a TH350 or 700R4, shipping`d be the deal killer though.

id like that 205 if he don't take it.that bolt up nice to my 700r4