I Got an Odd Problem

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

GregL

Full Access Member
Joined
Mar 10, 2016
Posts
375
Reaction score
292
Location
Palm Springs, CA.
First Name
Greg
Truck Year
1977
Truck Model
K 20
Engine Size
350
So I wake up to a dead battery in my '77 K20 a couple days ago. I finally stumble on the fact that the blower fan is powered up with the ignition off.
Truck has functioning original A/C. Nothing has been added to the truck or changed. Stock radio, etc. So I figure I must have a bad blower replay sticking closed. Replace the relay, same thing. Blower fan will run with key off. WTF?
Anybody come across this before?
Key off, I have power at the large red wire of the blower relay. The rest do not.
Appreciate any input.
Greg
You must be registered for see images attach
 

GregL

Full Access Member
Joined
Mar 10, 2016
Posts
375
Reaction score
292
Location
Palm Springs, CA.
First Name
Greg
Truck Year
1977
Truck Model
K 20
Engine Size
350
I don't think the blower circuit goes through the ignition switch. Nothing else seems to have any power with the key off.
 

Termite_Delight

Full Access Member
Joined
Feb 17, 2018
Posts
675
Reaction score
1,257
Location
Lanark Ontario Canada
First Name
Andy
Truck Year
1976 1975
Truck Model
K2500 K2500
Engine Size
350 L33
Is it plugged in to the wrong terminal in the fuse box? Should be in the "ign" side.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,445
Reaction score
28,347
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I'd look at the ignition switch.

I would too. Could be faulty or even simply out of adjustment. Even with a good one, you can very slowly turn the key towards ON and various items will power up at different times.
 

GregL

Full Access Member
Joined
Mar 10, 2016
Posts
375
Reaction score
292
Location
Palm Springs, CA.
First Name
Greg
Truck Year
1977
Truck Model
K 20
Engine Size
350
Thanks for the input guys but again, only the blower fan operates. If it was ignition related I would expect the wipers, turn signals, etc. to all function as well.
TM, thanks for the reply. But all was fine one day, next day went bad so changing terminals at the fuse box is out too.
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,424
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350
You must be registered for see images attach



pull the ac fan fuse check for voltage when off.. both sides of the fuse should be cold.
if the top clip is hot you have a back feed in the a/c harness then check the a/c harness for a short.
if the bottom clip is hot you have an ignition switch or harness problem
the ignition switch has more than one terminal for acc so dont totally discount the possibility of an ignition switch

i added a a/c schematic but there isn't much that can cause your problem there
 

GregL

Full Access Member
Joined
Mar 10, 2016
Posts
375
Reaction score
292
Location
Palm Springs, CA.
First Name
Greg
Truck Year
1977
Truck Model
K 20
Engine Size
350
Thanks for the diagram MM. I will pull the fuse, do those checks and post nack here.
G.
 

GregL

Full Access Member
Joined
Mar 10, 2016
Posts
375
Reaction score
292
Location
Palm Springs, CA.
First Name
Greg
Truck Year
1977
Truck Model
K 20
Engine Size
350
Fuse removed, bottom clip is hot.
 

highdesertrange

Full Access Member
Joined
Dec 19, 2013
Posts
1,066
Reaction score
211
Location
kalifornia
First Name
mike
Truck Year
1978
Truck Model
k30
Engine Size
454
first off stop buying parts until you know what's bad.


then see if there is a trouble shooting guide in one of the shop manuals posted in the reference library.

if not go to that schematic that Mix Master posted and start back tracing the fan hot from the fan back. keeping in mind that the purple wire at the fan is supposed to not be hot with the key off. also the red wire at the relay is hot al the time, so one of the other energizing wires must be hot. this is why changing the relay didn't fix the issue.

highdesertranger
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,445
Reaction score
28,347
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Does the blower run with the key turned back to the accessory position? It should not.
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,424
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350
Fuse removed, bottom clip is hot.
bottom clip is hot unplug the harness from the ignition switch, if it goes cold , it the switch or switch/linkage adjustment
 

Dana W Iverson

Junior Member
Joined
Apr 19, 2019
Posts
5
Reaction score
5
Location
north conway new hampshire
First Name
Dana Iverson
Truck Year
1986
Truck Model
K10
Engine Size
350
So I wake up to a dead battery in my '77 K20 a couple days ago. I finally stumble on the fact that the blower fan is powered up with the ignition off.
Truck has functioning original A/C. Nothing has been added to the truck or changed. Stock radio, etc. So I figure I must have a bad blower replay sticking closed. Replace the relay, same thing. Blower fan will run with key off. WTF?
Anybody come across this before?
Key off, I have power at the large red wire of the blower relay. The rest do not.
Appreciate any input.
Greg
You must be registered for see images attach
 

Dana W Iverson

Junior Member
Joined
Apr 19, 2019
Posts
5
Reaction score
5
Location
north conway new hampshire
First Name
Dana Iverson
Truck Year
1986
Truck Model
K10
Engine Size
350
Have you recently added like a stereo maybe or something requiring wiring, if so maybe you tapped into a constant 12 volt source accidentally, bad ground
 

Latest posts

Forum statistics

Threads
44,164
Posts
950,708
Members
36,278
Latest member
kodyg86
Top