How many bolts hold the transmission on and where?

[TheBigBlue2500]

Having to change out the flywheel and obviously you have to slide the transmission back but I am unsure of how many bolts are holding it on and how many in TOTAL I need to be looking for. So far I think there are at least 6 on the front of the transmission for sure, 2 left, 2 right, and 2 towards the top and man... what a pain in the duff it is to get them undone. Diagram or picture would be of great help!

 

[ali_c20]

6 bolts. Which transmission ? Th400? Don't forget dipstick and kickdown cables or anything that could bind/ interfere.

 

[idahovette]

And, obviously, the torque converter bolts.......

 

[Keith Seymore]

I wonder if there is enough room to drop the flywheel without undoing the trans, after the torque converter is pushed back?

K

 

[NickTransmissions]

I wonder if there is enough room to drop the flywheel without undoing the trans, after the torque converter is pushed back?

K

Not really. It's much easier to simply remove the trans, get it out of the way so the flexplate can be removed and new one installed with ease.

 

[TheBigBlue2500]

That's what I thought, and as alic20 said dipstick and all that jazz. Wish there was an easier way to replace the flywheel but it is what it is.

 

[JD Miller]

... what a pain in the duff it is to get them undone.

Its a piece of Cake .....Get a

1/2" Female - 3/8" Male, 35" Long, Impact Extension​

STEELMAN PRO 1/2 in. Drive 36 in. L x 3/8 in. Pinless Swivel Impact Extension Bar 79995 - The Home Depot

Bring a durable addition to your tool kit with the selection of this affordable STEELMAN PRO sae Drive L x Pinless Swivel Impact Extension Bar

www.homedepot.com

35" 1/2"Female-3/8"Male Long Impact Adapter/Extension

35" 1/2"Female-3/8"Male Long Impact Adapter/Extension

sktools.com

ETC

Or go to a tranny shop and watch

 

[NickTransmissions]

That's what I thought, and as alic20 said dipstick and all that jazz. Wish there was an easier way to replace the flywheel but it is what it is.

Do you have an auto trans or a manual?

 

[bucket]

Hopefully this doesn't turn out like that old thread where the dude asked how many bolts hold the engine in the truck.

But I'm betting that @TheBigBlue2500 knows that if something doesn't want to come out, the correct thing to do is look for the bolts that were overlooked. Not just yank harder, lol.