mikehill256504
Junior Member
- Joined
- Apr 13, 2024
- Posts
- 1
- Reaction score
- 0
- Location
- Alabama
- First Name
- Jermichael
- Truck Year
- 1982
- Truck Model
- C10
- Engine Size
- straight 6
Help with the name of this part and what does it control.
- Thread starter mikehill256504
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Memaloose
Full Access Member
- Joined
- Dec 2, 2018
- Posts
- 544
- Reaction score
- 1,595
- Location
- Dolan Springs, AZ
- First Name
- Tony
- Truck Year
- 1975
- Truck Model
- K20
- Engine Size
- 350
Welcome from AZ.
My '81 Custom Deluxe with a 250 had the same actuator but that was long ago and don't remember. Looks like it opens and closes a valve on the exhaust. Can't tell from the photo. Exhaust definitely.
My '81 Custom Deluxe with a 250 had the same actuator but that was long ago and don't remember. Looks like it opens and closes a valve on the exhaust. Can't tell from the photo. Exhaust definitely.
RaisedK5
Full Access Member
- Joined
- Sep 12, 2021
- Posts
- 115
- Reaction score
- 243
- Location
- Memramcook, New Brunswick, Canada
- First Name
- Leland
- Truck Year
- 1975
- Truck Model
- Blazer
- Engine Size
- 350
I believe that is the EFE valve. Basically a vacuum actuated exhaust valve that's part of the emissions system. See below.
You must be registered for see images attach
- Joined
- Nov 8, 2023
- Posts
- 114
- Reaction score
- 474
- Location
- Kalispell, Montana
- First Name
- Larry
- Truck Year
- 1981
- Truck Model
- C10
- Engine Size
- 250 6 cylinder
When it is pulled "on" by vacuum, it opens a flapper that allows exhaust gases to heat the intake manifold area right below the carburetor. With no vacuum, the spring inside pushes the flapper closed, like this:
You must be registered for see images attach
