dvdswan
Full Access Member
- Joined
- Mar 11, 2014
- Posts
- 2,366
- Reaction score
- 2,038
- Location
- Port Orchard, WA
- First Name
- Dave
- Truck Year
- 1978
- Truck Model
- K10
- Engine Size
- 350
And then the wool went over the sheep's eyes. LOL
Help with brake hoses
- Thread starter MovinMav83
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
tadslc
Full Access Member
- Joined
- Jan 20, 2020
- Posts
- 120
- Reaction score
- 134
- Location
- Birmingham, AL
- First Name
- Tad
- Truck Year
- 1981
- Truck Model
- C10
- Engine Size
- 350 Blueprint
Just to add my recent experience replacing both front brake hoses.
It was no fun. The engineers that designed the placement should have been fired. I ended up removing the sheet metal nut (not a fun job itself) from the rubber hose where it attaches to the frame and pulled the metal line through toward the wheel. I was then able to somewhat get a comfortable line of attack to the fitting.
Per my previous post about a good brake line wrench. I started off with an off brand one from Advance Auto and quickly lost faith so I ended up borrowing a Snap-On wrench from a friend and my faith was quickly restored but not without a liberal spray of PB Blaster beforehand.
In the end I only had a couple places on my hand bleed but it was definitely worth it.
It was no fun. The engineers that designed the placement should have been fired. I ended up removing the sheet metal nut (not a fun job itself) from the rubber hose where it attaches to the frame and pulled the metal line through toward the wheel. I was then able to somewhat get a comfortable line of attack to the fitting.
Per my previous post about a good brake line wrench. I started off with an off brand one from Advance Auto and quickly lost faith so I ended up borrowing a Snap-On wrench from a friend and my faith was quickly restored but not without a liberal spray of PB Blaster beforehand.
In the end I only had a couple places on my hand bleed but it was definitely worth it.
R Carnella
Full Access Member
- Joined
- Sep 21, 2017
- Posts
- 376
- Reaction score
- 827
- Location
- Long island
- First Name
- Rich
- Truck Year
- 1990
- Truck Model
- Suburban V2500
- Engine Size
- 5.3
Be sure to inspect all your brake line for rust like this.
Believe it or not this looked ok from the top looking down at it.
Believe it or not this looked ok from the top looking down at it.
You must be registered for see images attach
You must be registered for see images attach
