guitarfreak235
Full Access Member
- Joined
- Feb 26, 2012
- Posts
- 643
- Reaction score
- 41
- Location
- Spartanburg S.C.
- First Name
- Andrew
- Truck Year
- 86 86
- Truck Model
- k10 c20
- Engine Size
- 350 350
Ok so right after i completed my header/exhaust project i encountered a new problem 
my truck lugs and seems to skip at about 40 when it shifts into 4th. it happens slightly when it first shifts into 3rd too. this doesnt happen at idle or at higher rpms. just when the engine is under load at lower rpms. its kinda violent and shakes the truck pretty good. just curious at what i should check for. is it possible that ive fried a spark plug wire? cuz its possible that theyve touched the headers but im not sure.... any help is appreciated.
my truck lugs and seems to skip at about 40 when it shifts into 4th. it happens slightly when it first shifts into 3rd too. this doesnt happen at idle or at higher rpms. just when the engine is under load at lower rpms. its kinda violent and shakes the truck pretty good. just curious at what i should check for. is it possible that ive fried a spark plug wire? cuz its possible that theyve touched the headers but im not sure.... any help is appreciated.
