77Dmax
Junior Member
- Joined
- Nov 10, 2024
- Posts
- 25
- Reaction score
- 39
- Location
- vt
- First Name
- Joe
- Truck Year
- 1977
- Truck Model
- c20
- Engine Size
- 6.6
Bad motor mounts will create an odd driveline angle that can cause a vibration. I would start there.
The rotational slop in the driveshaft is probably worn spider gears and cross shaft, especially if you have been doing burnouts all over town.
The rotational slop in the driveshaft is probably worn spider gears and cross shaft, especially if you have been doing burnouts all over town.
