Gas tank cleaning

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,108
Reaction score
15,456
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
OK, so wasn't sure where to post this, this seemed like the best place, but I'm looking to clean all the stuff out of my gas tank.

3 years of gas sitting in it exposed to the open air has done it some harm...

There's like a gunk in the bottom, I'm NOT ok with sending that **** thru my 502.

Anything I can pour in with something else like water and let it sit for a while?

Like **** gone?

Thanks guys
 

Rickf

Full Access Member
Joined
Jul 29, 2017
Posts
574
Reaction score
716
Location
Grafton NH
First Name
Rick
Truck Year
1974, 1954 & a 1937
Truck Model
K20
Engine Size
350
If the tank is out of the vehicle, a gallon or two of gas with some nuts & bolts sloshing around should work, rinse and repeat if needed.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,108
Reaction score
15,456
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
If the tank is out of the vehicle, a gallon or two of gas with some nuts & bolts sloshing around should work, rinse and repeat if needed.


I was wondering about using actual gas.

Excellent!!!
 

Crispy

Full Access Member
Joined
Apr 5, 2017
Posts
1,454
Reaction score
1,391
Location
Carbon County, Pennsyltucky
First Name
Chris
Truck Year
1989
Truck Model
Suburban V1500
Engine Size
5.7
Small rocks, a chain, nuts and bolts. Some e-85 if you can get it will do a good job of eating that stuff up. If you use nuts and bolts, or rocks take a count going in and make sure they all come back out lol. You can also use a chain and tape it to the tank or otherwise keep it attached on the exterior for easy removal.

I've also heard of guys being happy with Berryman carb cleaner in the tank.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,108
Reaction score
15,456
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
Man, these are all really great suggestions.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,108
Reaction score
15,456
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
If I dump a bunch of acetone mixed with just regular 87 and rocks **** nuts and bolts and ****, that may get it all out.
 

Preston Tucker

Full Access Member
Joined
May 13, 2020
Posts
106
Reaction score
51
Location
Maine
First Name
Preston
Truck Year
1974
Truck Model
K20
Engine Size
350
White vinegar does nicely as well, fill er up and let it sit for 24 hours then rinse.
 

Backfoot100

Full Access Member
Joined
Aug 18, 2017
Posts
374
Reaction score
648
Location
Florida
First Name
Eddie
Truck Year
1986
Truck Model
C1500 Suburban
Engine Size
Carbed 350
I used mineral spirits and dumped a pound or two of new stainless bolts and nuts in it. Put my floor jack under one end and raised it up about 6". Lift up the other end and let it slosh back and forth a dozen times. Let it sit for awhile and repeat. I did that for a few days total and it looked brand new when I was done.

I've also heard of guys putting a few boxes of BB's in them too.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,108
Reaction score
15,456
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
Right now it's sitting with a bunch of 87, kerosene, and acetone in it.

Wild combo, but it's what I have.

I'll see how it looks when I return to it this evening.. Shake it up a bit, if it's still nasty, I guess I'll have it hot tanked.
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,325
Reaction score
17,370
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
When my Pop finally got his '68 Pontiac finished, it had 20 year old gas in the tank. He took the line off the tank, and blew the air through it from the carb-side. He said it was stuck and then popped out a glob. He hooked it back up to the tank. Before starting it for the first time, we put 10 gallons of fresh fuel with a heavy dose of carb/injector cleaner. This was a fresh rebuild on the engine, carb, the entire car. It fired right up, and ran great, and has never had an issue with anything plugging up, gumming up or anything, and he drives it all the time. Even took it to Arizona a month ago.
 

militaryjeep

Full Access Member
Joined
Mar 4, 2020
Posts
127
Reaction score
111
Location
chatsworth
First Name
steve
Truck Year
1986
Truck Model
Suburban K20
Engine Size
5.7
Buy a new Spectra Tank from Rockauto or other vendor... They are pretty good quality and reasonably priced.
 

gotyourgoat

Full Access Member
Joined
Mar 27, 2014
Posts
2,117
Reaction score
3,418
Location
NRV Virginia
First Name
gotyourgoat
Truck Year
1984
Truck Model
c10
Engine Size
smokin' 305
When my Pop finally got his '68 Pontiac finished, it had 20 year old gas in the tank. He took the line off the tank, and blew the air through it from the carb-side. He said it was stuck and then popped out a glob. He hooked it back up to the tank. Before starting it for the first time, we put 10 gallons of fresh fuel with a heavy dose of carb/injector cleaner. This was a fresh rebuild on the engine, carb, the entire car. It fired right up, and ran great, and has never had an issue with anything plugging up, gumming up or anything, and he drives it all the time. Even took it to Arizona a month ago.

Buy a new Spectra Tank from Rockauto or other vendor... They are pretty good quality and reasonably priced.

The answer is either of the above^^
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,247
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
I have heard some guys say to put their bolts or ball bearings or chain in it with their solvent of choice and put it in the back of their truck and seal it up and drive around for a week. Don't go easy, slamming on brakes and fast starts.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,108
Reaction score
15,456
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
I have heard some guys say to put their bolts or ball bearings or chain in it with their solvent of choice and put it in the back of their truck and seal it up and drive around for a week. Don't go easy, slamming on brakes and fast starts.


We'll......... The trucks not running yet.... LOL
 

Latest posts

Forum statistics

Threads
44,414
Posts
956,968
Members
36,737
Latest member
Fjoel040
Top