Garage hacks/ideas to make life better?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,389
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
Id love to have a garage that size but would have to move west of where I currently am and still not sure I could afford the property. one big door that swings or slides to one direction would be hell on hinges and casters. You could do 2 sliding doors like on a house so you can get in one side or the other.

I bought some led lights but thought I would use housing from older fluorescent lights to redirect the light.

The problem with something moving to the right is that there’s a covered breezeway right next to it. Something to swing open each way might be more feasible there. I have a two ton winch that would be cool to use for a door that pops up (this would still be hell on hinges) or even a bifold door. Those are really expensive, though. Sheesh. I’d like to come up with a cheaper solution.
 

4WDKC

Full Access Member
Joined
Jan 27, 2016
Posts
2,366
Reaction score
1,090
Location
Southern Florida
First Name
Kacy
Truck Year
1987
Truck Model
V10
Engine Size
350
The problem with something moving to the right is that there’s a covered breezeway right next to it. Something to swing open each way might be more feasible there. I have a two ton winch that would be cool to use for a door that pops up (this would still be hell on hinges) or even a bifold door. Those are really expensive, though. Sheesh. I’d like to come up with a cheaper solution.

I was thinking like sliding doors on your house work. Similar to this but hanging from the I/H/W beam already in place.
You must be registered for see images


I worked for a company that had these on a pole barn to house the trucks, trailers and equipment at night.
 
Last edited:

Jrgunn5150

Questionable methods
Joined
Jan 11, 2016
Posts
2,739
Reaction score
1,412
Location
Ionia Mi
First Name
J.R.
Truck Year
1979
Truck Model
C10
Engine Size
6.slow
I have wifi and a bluetooth speaker in my garage in addition to the stuff I've seen. My home wifi didn't quite work out there so I installed a second router.
 

Westislander

Full Access Member
Joined
Nov 3, 2018
Posts
299
Reaction score
328
Location
Massachusetts
First Name
Gregg
Truck Year
1985
Truck Model
K10
Engine Size
350
A $15 dust cyclone collector (on amazon), unbelievable difference in dust collection.
You must be registered for see images attach
 

fried_daddy

Full Access Member
Joined
Apr 7, 2019
Posts
288
Reaction score
245
Location
Birmingham, AL
First Name
Matt
Truck Year
1987
Truck Model
R1500
Engine Size
5.3 LS
A $15 dust cyclone collector (on amazon), unbelievable difference in dust collection.
You must be registered for see images attach
I also have one of those. I love it. It also saves on replacing bags and cleaning filters on my vacuum.
 

trukman1

Full Access Member
Joined
Apr 20, 2018
Posts
340
Reaction score
138
Location
USA
First Name
Gary
Truck Year
1988
Truck Model
K5 Blazer
Engine Size
5.7 L (350)
This thread reminded me I need another bag of cheap kitty litter for spills
and oil leaks on the shop floor.

I've found using dry laundry soap gets the oil stains out better than anything else I've tried. Outside driveway got multiple oil stains from contractors van. I cover liberally with the soap powders to about half an inch and leave it. Eventually the rain will wash it away and the stains wash away with it.
 

Westislander

Full Access Member
Joined
Nov 3, 2018
Posts
299
Reaction score
328
Location
Massachusetts
First Name
Gregg
Truck Year
1985
Truck Model
K10
Engine Size
350
Pretty nifty. How do you have it set up?
It gets bolted onto a 5 gallon pail, the top hose is to your shop vac the side hose is the pickup hose. As the dust and debris goes in it spins down dropping in the 5 gallon pail, hardly anything ends up in the shop vac
 

TravisB

Full Access Member
Joined
Jan 3, 2018
Posts
1,148
Reaction score
1,273
Location
Kentucky
First Name
Travis
Truck Year
1978
Truck Model
C10
Engine Size
350
A $15 dust cyclone collector (on amazon), unbelievable difference in dust collection.
You must be registered for see images attach
I need to get something like this. I have nearly destroyed my shop vac keeping dust down in the sandblaster.
 

Westislander

Full Access Member
Joined
Nov 3, 2018
Posts
299
Reaction score
328
Location
Massachusetts
First Name
Gregg
Truck Year
1985
Truck Model
K10
Engine Size
350
I need to get something like this. I have nearly destroyed my shop vac keeping dust down in the sandblaster.
Night and day difference since I started using this with my blast cabinet
 

rt66paul

Full Access Member
Joined
Apr 16, 2016
Posts
230
Reaction score
109
Location
California
First Name
paul
Truck Year
1991 suburban
Truck Model
2500
Engine Size
7.4
You guys missed the couch that goes in front of the TV and next to the refrigerator.
 

Keith Seymore

Full Access Member
Joined
Jul 13, 2015
Posts
2,881
Reaction score
9,144
Location
Motor City
First Name
Keith Seymore
Truck Year
1987
Truck Model
R10
Engine Size
4.3L
I was thinking like sliding doors on your house work. Similar to this but hanging from the I/H/W beam already in place.
You must be registered for see images


I worked for a company that had these on a pole barn to house the trucks, trailers and equipment at night.

I was just in a restaurant that had something similar to this. It caught my eye because I thought I could do something similar to partition off the portion of the garage I work in, both for heat and visually, from the end of the garage that is pure storage.

The difference is that they had made theirs out of old closet doors and then made "hooks" that go over a piece of black pipe. That way you can slide them back and forth to close off the area, but you can also remove them completely or add extras as desired.

K
You must be registered for see images attach


You must be registered for see images attach
 
Last edited:

Keith Seymore

Full Access Member
Joined
Jul 13, 2015
Posts
2,881
Reaction score
9,144
Location
Motor City
First Name
Keith Seymore
Truck Year
1987
Truck Model
R10
Engine Size
4.3L
You'd think as long as I've been playing with cars that I'd have a million ideas....

I'm having a slow time recalling them. I'll post a few as they come up.

Here's one I noticed just now : I make a little tab on the tape by folding it back on itself; that way the next time I need it I don't have to try to find the end.

K

You must be registered for see images attach
 
Last edited:

Keith Seymore

Full Access Member
Joined
Jul 13, 2015
Posts
2,881
Reaction score
9,144
Location
Motor City
First Name
Keith Seymore
Truck Year
1987
Truck Model
R10
Engine Size
4.3L
I've been painting steel rally wheels for probably 45 years. I didn't think of this until last week:

I used to tape around the wheel and then cover the whole tire sidewall with tape. That's pretty time consuming, labor intensive, and you go through a lot of tape.

I found an old piece of roofing paper and made a reusable "mask" out of that. Now I can do one round of tape and the rest of the tire is already protected.

K

You must be registered for see images attach


You must be registered for see images attach
 
Last edited:

Keith Seymore

Full Access Member
Joined
Jul 13, 2015
Posts
2,881
Reaction score
9,144
Location
Motor City
First Name
Keith Seymore
Truck Year
1987
Truck Model
R10
Engine Size
4.3L
I resisted getting a roll around tool box for years, because I'm so "mobile". I used to have two (or three) of those little Craftsman boxes that I would set in the truck every time I went racing or on a mission of mercy.

It got to where I spent more time looking for stuff then I did actual productive work. Now that I have a nice, organized box I can reach my hand out and the tool is usually right there. I ask myself why I didn't do this years ago.

The way I overcame the "mobility" problem is, now when I go racing, I just wheel the whole box up the ramp of the trailer and strap it to the counter at the front. I've always taken every tool I own but now the orientation is exactly the same as when I am at home.

K
You must be registered for see images attach
 
Last edited:

Forum statistics

Threads
44,168
Posts
950,805
Members
36,286
Latest member
goodwrenchca
Top