Does a seal exist for my factory 1977 c10 sliding window

[77Big10]

I just pulled this seal out of my 1977 C10 Silverado. I'm 95% certain it was the factory because it's so beat-up and had the matching aged chrome lock strip. I've been finding mixed answers on what is the best solution for this fix. I don't have a preference whether it has the Chrome locking strip or not. And if I replace it with a later model OEM sliding window, will that work, too?

 

[TotalyHucked]

I think I see a flat lip on the backside. That style (where there's a flat lip that goes in the gasket and then the glass is in a frame that protrudes out a bit) typically uses the same seal as a solid back glass. Hard to say from those pics, do you have any with it on the truck?

With trim groove:

Back Glass Gasket Seal w/ Trim Groove - 73-91 Chevy GMC C/K Truck

Back Glass Gasket Seal w/ Trim Groove - 73-91 Chevy GMC C/K Truck This rear window seal goes first on the body then the glass is placed in the opening. Tucking in the self locking strip secures the glass in place. Made from ozone resistant EPDM rubber and from the same OE specs as the original...

www.autometaldirect.com

Trim strip:

Chrome Rear Window Gasket Lock Strip w/ Corner Joints - 73-91 Chevy GMC C/K Truck

Introducing the Chrome Rear Window Gasket Lock Strip with Corner Joints, meticulously designed to cater to the 1973-1991 Chevy GMC C/K Truck as well as the rear quarter windows of the Blazer, Jimmy, and Suburban. This unique accessory is an essential component that not only enhances the visual...

www.autometaldirect.com

Without:

Back Glass Gasket Seal w/o Trim Groove - 73-91 Chevy GMC C/K Truck

Back Glass Gasket Seal w/o Trim Groove - 73-91 Chevy GMC C/K Truck This rear window seal goes first on the glass and is installed using the rope-in method. It is a standard black gasket without trim groove. Our product is made from the original specs and from high quality ozone resistant...

www.autometaldirect.com

 

[77Big10]

I think I see a flat lip on the backside. That style (where there's a flat lip that goes in the gasket and then the glass is in a frame that protrudes out a bit) typically uses the same seal as a solid back glass. Hard to say from those pics, do you have any with it on the truck?

With trim groove:

Back Glass Gasket Seal w/ Trim Groove - 73-91 Chevy GMC C/K Truck

Back Glass Gasket Seal w/ Trim Groove - 73-91 Chevy GMC C/K Truck This rear window seal goes first on the body then the glass is placed in the opening. Tucking in the self locking strip secures the glass in place. Made from ozone resistant EPDM rubber and from the same OE specs as the original...

www.autometaldirect.com

Trim strip:

Chrome Rear Window Gasket Lock Strip w/ Corner Joints - 73-91 Chevy GMC C/K Truck

Introducing the Chrome Rear Window Gasket Lock Strip with Corner Joints, meticulously designed to cater to the 1973-1991 Chevy GMC C/K Truck as well as the rear quarter windows of the Blazer, Jimmy, and Suburban. This unique accessory is an essential component that not only enhances the visual...

www.autometaldirect.com

Without:

Back Glass Gasket Seal w/o Trim Groove - 73-91 Chevy GMC C/K Truck

Back Glass Gasket Seal w/o Trim Groove - 73-91 Chevy GMC C/K Truck This rear window seal goes first on the glass and is installed using the rope-in method. It is a standard black gasket without trim groove. Our product is made from the original specs and from high quality ozone resistant...

www.autometaldirect.com

the photo attached below was before I pulled the window but I have a precision seal with the Chrome lock strip, and if I try it, it will not fit correctly. It does have a lip on the edge where it seats inside the seal it's probably a little bit thicker than an eighth of an inch

 

[TotalyHucked]

Yeah, that's just a regular rear window gasket like the solid back glasses use

 

[77Big10]

Yeah, that's just a regular rear window gasket like the solid back glasses use

So should I order a different one other than the precision one? Because everything I do I can’t seem to get it to fit right. Seems to be too big for the window

 

[TotalyHucked]

So should I order a different one other than the precision one? Because everything I do I can’t seem to get it to fit right. Seems to be too big for the window

Nope, Precision is the best brand. They are a bear though, even my glass guy says how hard they are to install. I don't mess with glass cuz it's such a bear, well worth it to pay someone

 

[Grit dog]

@77Big10
Can confirm what huck said and your seal should fit.
Same as our 86 that I put new Precision window seals in.
Yes it appears to be longer than necessary or what will fit. But it does fit. Once the corners are fit in tightly and any “stretched” sections are relieved, it’s exactly the right size.
If it’s any consolation, the rear window/seal is much easier to install than the windshield.
And…nice looking truck!

 

[77Big10]

Thank you boss. I’m trying my best. I just get the joy of reassembling all of it after the fresh paint job.