Dimple Dies

[DV8CUSTOMS]

Will the smaller 1/2 and 3/4 feature a hole for a draw bolt?

Yes

 

[DV8CUSTOMS]

Quick update for you, material is on order but it will be close to the end of the year before I have these ready to ship. I have to wait for machines to come open to run them.

 

[DV8CUSTOMS]

Hey guys, these are still happening. I am just having to wait in line longer than I had hoped at work. Really pushing to get them done soon.

 

[DV8CUSTOMS]

Here are the missing photos from my previous post

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[DV8CUSTOMS]

Finally got a sample off the CNC to validate my design. This is the 1/2" die in 3/16, 1/8, 16ga and 22ga.

I am happy with it so time to start cranking them out finally.

You must be registered for see images attach

 

[DV8CUSTOMS]

1/2" dies are done

You must be registered for see images attach

You must be registered for see images attach

 

[DV8CUSTOMS]

3/4" done

You must be registered for see images attach

 

[DV8CUSTOMS]

Everything made out of 2" material is now done. This is the 1/2", 3/4", and 1". Got started on the 3" material today, it won't be long now.

You must be registered for see images attach

 

[DV8CUSTOMS]

Machining is done! Off to be hardened this week and so they should be ready to start shipping next week. As soon as they are 100% complete I will have all the details for placing an order.

You must be registered for see images attach

 

[DV8CUSTOMS]

Stay tuned

You must be registered for see images attach

 

[DV8CUSTOMS]

Ok guys here are the details to order

Send an email to [email protected] with the following information:

1. Your Name
2. Your Shipping Address
3. Whether you want the 4 piece set or the 7 piece set

I will send you a paypal link for your payment. This is a little more work than just paypaling me the money but it will help me keep track of how many kits are sold and to whom.

Kit details are as follow:

4 piece kit: 1/2", 1", 1-1/2", 2"
$185 shipped in US


7 piece kit: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", and 2"
$300 shipped in the US

NOTE: These do not punch the hole, you will have to drill the appropriate sized hole

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[DV8CUSTOMS]

I have a stack of FEDEX boxes going out Friday, order by tomorrow to get yours into that stack

 

[DV8CUSTOMS]

Only 7 full sets and 14 small sets left


And for those who have purchased a set and plan to use a bolt through them..... The 1/2" uses a 5/16 bolt, the 3/4" and 1" use 7/16, and the rest use 3/4" bolt. 2-1/2" length works for all of them

 

[CSMaverick07]

What material did you end up using?

 

[DV8CUSTOMS]

what material did you end up using?

4140