Dash faceplate

[Wi chevvy guy]

88 v10 suburban with faded dash face cant find desent replacement is there a paint u can use anyone knows about

You must be registered for see images attach

 

[Kim Burke]

Honestly, I tried to get away without buying a new one by painting my old one. Duplicolor’s chrome paint blows.
You are probably three times better at this stuff than me but I knew I could not look at the crappy job I’d done.

Good luck my friend

 

[HotRodPC]

I seen one recently where a guy used an adhesive back paper. Kinda like contact paper to cover his. He said there are different colors and patterns but he did his in like a chrome look paper. It looked good. Just not sure how long it would last and how long it would look good.

 

[75gmck25]

I bought a new bezel from eBay and it was cheaper than I could find from any other truck parts source. The one I bought was just a black bezel, and I transferred the old wood-grain applique over to the new bezel.

Bruce

 

[86gmcfayetteville]

I got one of the brushed aluminum with sticky back from LMC-
http://www.lmctruck.com/icatalog/csb/full.aspx?Page=90
(item #5)
Pulled the old one off, cleaned everything up, took my time putting the new one on, looks great. Hope this helps, it was well worth the $50 to me.

 

[Crispy]

I used 3M Brushed titanium to do a double din install on my old 03 Ram. Held up real well to interior heat and sun, I did have 20% tint though. You will also need access to the rear side of that silver facing. If it comes off you're golden, if not then the corners may peel up after a while. I bought it from ebay or amazon for like 20 bux. I forgot what the measurements of the roll were but I got one of the smaller sizes available.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[HotRodPC]

I used 3M Brushed titanium to do a double din install on my old 03 Ram. Held up real well to interior heat and sun, I did have 20% tint though. You will also need access to the rear side of that silver facing. If it comes off you're golden, if not then the corners may peel up after a while. I bought it from ebay or amazon for like 20 bux. I forgot what the measurements of the roll were but I got one of the smaller sizes available.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

I think this is exactly what I was talking about right here. That looks about as good and about the same color this guy had on his.

 

[Crispy]

I think this is exactly what I was talking about right here. That looks about as good and about the same color this guy had on his.

I'm sure other brands carry it but this I would suggest a reputable company like 3m. And yes, they have tons of different colors, including a brushed aluminum thats pretty close to what the factory bezel looks like. They even have camo if you want to hide your gauges in plain site.

https://www.rvinyl.com/3M-1080-Series-Wrap-Film.html

That site shows the colors where 3m site doesnt.

 

[Wi chevvy guy]

Thx everyone for the feedback

 

[Billy]

I used 3M Brushed titanium to do a double din install on my old 03 Ram. Held up real well to interior heat and sun, I did have 20% tint though. You will also need access to the rear side of that silver facing. If it comes off you're golden, if not then the corners may peel up after a while. I bought it from ebay or amazon for like 20 bux. I forgot what the measurements of the roll were but I got one of the smaller sizes available.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Billy]

That looks amazing!

 

[Billy]

88 v10 suburban with faded dash face cant find desent replacement is there a paint u can use anyone knows about

You must be registered for see images attach

I want the old trans am dash material. The rainbow swirl stuff. Just cuz. I found some on eBay, but it's not the exact same. It's close enough for me, but it doesn't come in a wide enough roll to cover the whole bezel, and i don't want a seem.

 

[Wi chevvy guy]

Yes thats the ticket right there thx alot

 

[calredneck]

Look at this price is right https://www.rvinyl.com/Dash-Kits-Chevrolet-Pick-Up.html

 

[Goldie Driver]

I want the old trans am dash material. The rainbow swirl stuff. Just cuz. I found some on eBay, but it's not the exact same. It's close enough for me, but it doesn't come in a wide enough roll to cover the whole bezel, and i don't want a seem.

2 foot wide here :

http://www.hotrodworks.net/decal/dash.html