Dana 70 Disc swap brackets, Holley 12-700, load lvl valve

[da_raabi]

Hey guys I've got a few things to get rid of here. Prices are listed and OBO. I am also willing to work in a partial/whole trade for the style mirrors and running boards in the following pic, or for a CUCV style grill guard. let me know what you have.

You must be registered for see images attach

Holley 12-700 Billet Electric Fuel Pump. Supports up to 900 carb'd HP. Bought it off a guy on another forum and never used it. $250 shipped anywhere in the lower 48.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

DiY4X Dana 70 SRW Disc Brake Kit. Opened and installed then realized it did not fit DRW. The only thing I did to them was paint them with Duplicolor semigloss black and cleared with duplicolor engine enamel clear. $65 shipped anywhere in the lower 48.

You must be registered for see images attach

Load Level Valve that connects to the bed. Pulled off the truck, should work. $25 shipped.

Track bars. Pulled off my 80 Camaro, universal application, hardware included. $35 + shipping to lower 48.

You must be registered for see images attach

Please PM me if interested. I take PayPal only. Thanks!

 

[da_raabi]

Fuel Pump Sold

 

[da_raabi]

Somebody has to want rear discs! Make me an offer!

 

[bucket]

Are those trac bars chrome? I'd like to get them, but I think shipping would be a little up there. Care to give a quote? My zip is 43140 or 23824.

 

[da_raabi]

Are those trac bars chrome? I'd like to get them, but I think shipping would be a little up there. Care to give a quote? My zip is 43140 or 23824.

I'll see what I can do. Not sure if they are chrome or not, they could definitely use a polish though!

 

[da_raabi]

Are those trac bars chrome? I'd like to get them, but I think shipping would be a little up there. Care to give a quote? My zip is 43140 or 23824.

I'm thinking I can probably ship the trac bars for under $20 to your Virginia address. Do you want to make it $50 shipped?

 

[Stewzer55]

Hmmm, I have a D70 SRW, But i'm really thinking about putting duals on it because it will be used for towing. The D70 and 14 Bolt Full Float should use the same brake kit if SRW.

 

[da_raabi]

Hmmm, I have a D70 SRW, But i'm really thinking about putting duals on it because it will be used for towing. The D70 and 14 Bolt Full Float should use the same brake kit if SRW.

I'm not exactly positive on that. I know these WOULD have worked on my DRW if I had used deeper rotors off of a 2003 3500 DRW Express Van, but I never got that far with the project. As far as the 14 bolt FF, I would have no idea.

All I can say is that this was a well made kit that really just needed some good parts research to work well. I just ran out of time to do that.

If anyone is interested please send me a PM!

 

[bucket]

I'll let you know soon about the bars.

I think the brackets only bolt to the D70's larger tubes. So they work on DRW with van rotors huh? Well that's kinda neat.

 

[da_raabi]

I'll let you know soon about the bars.

I think the brackets only bolt to the D70's larger tubes. So they work on DRW with van rotors huh? Well that's kinda neat.

Yea it took a bit to figure it out, but they need 2003 Express Van 3500 DRW rotors and studs/lugs, K20 calipers/pads, and possibly small spacers to center-up the rotors on the caliper. I decided to just rebuild the drums because this was for my DD, but that combo of parts should make it happen.

 

[da_raabi]

Track bars sold! Common, somebody has got to want the brackets. MAKE AN OFFER. I need the cash! I'll even toss in the load level valve free for a good offer on the brackets!

 

[da_raabi]

Everything except the load level valve is sold. I'll probably just toss that...

 

[bucket]

Hey I forgot to tell you, the bars were waiting for me safe and sound when I got down here. Thanks again

 

[da_raabi]

Hey I forgot to tell you, the bars were waiting for me safe and sound when I got down here. Thanks again

No problem, glad they got there ok!