Dana 60 hubcaps.

[chevyguy76]

Hey guys, I’ve done some searching but can’t seem to find any current listings for the factory Dana 60 hub caps. I have a couple pairs of fronts. Driver quality that I might sell. Just trying to see what they were going for.

 

[Grit dog]

Well “driver quality” could mean many things. But those are the hardest to find (also least in demand as there are far more 1/2 and 3/4 ton trucks out there looking for OE hubcaps.
As usual, price them a bit high and see what happens.
If no dents in them I’d bet they fetch $40 a piece or more.

 

[SquareRoot]

Hey guys, I’ve done some searching but can’t seem to find any current listings for the factory Dana 60 hub caps. I have a couple pairs of fronts. Driver quality that I might sell. Just trying to see what they were going for.

Can you post a pic? Also, check you mailbox, I sent you a message.

 

[85K304SPD]

Throw up some pictures of them, and see what you find out. My K30 has a Dana...Hmmm.

 

[Big Chip]

One post in 12 years?!? This has to be some sort of record.

 

[SquareRoot]

One post in 12 years?!? This has to be some sort of record.

Maybe he's shy? Or has dementia? Hubcaps....we just need the hubcaps!

 

[HOTFOOT]

One post in 12 years?!? This has to be some sort of record.

Maybe he was waiting for the price to spike?

 

[AyWoSch Motors]

Thats all the ones I have. Got enough for a c25 gmc, a k20 gmc, or a k20 chevy, and half a half ton gmc, haha

What do these Dana 60 caps look like? I'm unfamiliar.

You must be registered for see images attach

 

[Strick]

Don't they all have 2 rings on the inside so the center an be cut out for either 44/10 Bolt or Dana 60? That's how mine are.

Strickland

 

[Grit dog]

They have a deeper lip and I believe a larger diameter knockout than a 3/4 ton hubcap with a 10 bolt or D44 axle.

You must be registered for see images attach

 

[Bennyt]

They have a deeper lip and I believe a larger diameter knockout than a 3/4 ton hubcap with a 10 bolt or D44 axle.

You must be registered for see images attach

Why does this pic remind me of a girlfriend I once had??? And yes, they were larger diameter and she had deep lips as well.

 

[SquareRoot]

Don't they all have 2 rings on the inside so the center an be cut out for either 44/10 Bolt or Dana 60? That's how mine are.

Strickland

No

 

[Craig 85]

They have a deeper lip and I believe a larger diameter knockout than a 3/4 ton hubcap with a 10 bolt or D44 axle.

You must be registered for see images attach

Yes the D60 hub caps have a larger inner diameter.

For reference with aftermarket wheels the one on the top is a GM 10 bolt. The bottom is a D60. You can see it fills the cap completely and protrudes further.

You must be registered for see images attach

You must be registered for see images attach

 

[Strick]

There are two trace rings on the inside of the wheel cover to accommodate both the smaller and larger hub though. I only have the 10Bolt/Dana 44 pic listed here. These are much more common than the larger Dana 60.

You must be registered for see images attach

Strickland

 

[Rumbledawg]

They have a deeper lip and I believe a larger diameter knockout than a 3/4 ton hubcap with a 10 bolt or D44 axle.

You must be registered for see images attach

niiiice!
would love to get a set in good shape as them