SquareRoot
Full Access Member
- Joined
- Mar 18, 2017
- Posts
- 4,198
- Reaction score
- 8,043
- Location
- Arizona
- First Name
- Mike
- Truck Year
- 85
- Truck Model
- K20
- Engine Size
- 350
I've been slowly working on getting this kick-ass stereo system in the 85.
Finally got my custom fiberglass/MDF kick panels done. Now I know you can buy these but, I've seen them and they are way to cheesy for me. I'm hard on things and only want to make **** once.
More importantly, I refuse to stick a 6.5" speaker on the floor, takes up waaay too much room.
Since I'm running a Focal 3 way component system, my bass speakers (6.5") are in the doors. The kick panels house the mid-range speakers (4"). Therefore, they are more directional and benefit the imagining greatly if you can aim them towards the listener.
The pics tell the story.
Materials: 1/4 & 1/2 MDF, 4" schedule 80 PVC, fiberglass resin, stapler, Herculiner (aerosol).
Process:
Cut backpanel to liking. Cut PVC to angle/length to liking. Stretch fleece over piece and staple on backside. Mix resin and brush on (saturate!) fleece.
Cut, shape, sand and finish how you want it.
I left mine natural, the texture matches my bed liner floors and mat perfectly.
I decided to slightly modify my parking brake slightly for more clearance. Two 45* doglegs and shortened it an inch. Perfecto!
Finally got my custom fiberglass/MDF kick panels done. Now I know you can buy these but, I've seen them and they are way to cheesy for me. I'm hard on things and only want to make **** once.
More importantly, I refuse to stick a 6.5" speaker on the floor, takes up waaay too much room.
Since I'm running a Focal 3 way component system, my bass speakers (6.5") are in the doors. The kick panels house the mid-range speakers (4"). Therefore, they are more directional and benefit the imagining greatly if you can aim them towards the listener.
The pics tell the story.
Materials: 1/4 & 1/2 MDF, 4" schedule 80 PVC, fiberglass resin, stapler, Herculiner (aerosol).
Process:
Cut backpanel to liking. Cut PVC to angle/length to liking. Stretch fleece over piece and staple on backside. Mix resin and brush on (saturate!) fleece.
Cut, shape, sand and finish how you want it.
I left mine natural, the texture matches my bed liner floors and mat perfectly.
I decided to slightly modify my parking brake slightly for more clearance. Two 45* doglegs and shortened it an inch. Perfecto!
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Last edited:
