Carb to brake booster hard vacuum line, why can’t I find it!?!?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

PatinaTurner

Junior Member
Joined
May 31, 2023
Posts
6
Reaction score
17
Location
Northeast Massachusetts
First Name
C
Truck Year
1981
Truck Model
c10 Cheyenne
Engine Size
305
Apologies if this has been asked before but I couldn’t seem to find an answer after a bunch of searching.

in my 81 Cheyenne, there’s a hard line running from the vacuum source in the carb to the power brake booster. Mine is absolutely crushed and obviously not working any longer but I simply cannot find a direct replacement at the usual places. Plenty of rubber lines, but nothing exactly the same at the parts stores or Rock Auto. I did find one site that I’ve never dealt with that did have them I’d feel a lot more comfortable getting it from a reputable and known site.

am I searching for the wrong thing or is it a needle in a haystack? Or should I just be replacing it with a rubber line?

thanks in advance.
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,981
Reaction score
2,522
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
If you're is a metal line then your "easiest" option will be to get some universal 3/8" steel tubing from a parts store and bend it to match the original. You might try Inline Tube as they make prebent brake and fuel tubing but I doubt there's enough demand for the booster tube to make it worth reproducing.

I've always just run rubber fuel hose without issue, there's not enough vacuum to collapse healthy hose.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,876
Reaction score
5,705
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,589
Reaction score
4,711
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
I've only seen a couple of the hard line ones. It's usually all rubber. But I suppose a guy could make one from some brake tubing. I use it for different projects like this sometimes.

Oops. I didn't read enough. Just noticed
nvrenuf said it first lol
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
10,041
Reaction score
10,137
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
There's no good reason to mandate a hard line there, rubber will be fine in 99.99% of all applications 35-45 years after the new truck warranty has expired.
Make it easy for yourself and move on to the next thing.
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,303
Reaction score
2,272
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
The original hard line on my truck was shaped so it curved over and was supported by a grommet in the bracket for the throttle and the TH350 kickdown. Then there was a fairly short rubber line from there over to the brake booster. Very stable, but a PIA when you pulled the Quadrajet off. I don’t have mine running through the bracket anymore.

You don’t need to have the the hard line for proper function, but it moves that booster hose connection out into an area where it’s easier to get a pliers on the spring clamp when you disconnect.
 

Jeff Lewis

Member
Joined
Aug 2, 2019
Posts
47
Reaction score
48
Location
Missouri
First Name
Jeff
Truck Year
1986
Truck Model
Silverado
Engine Size
3.2
rubber, attach it to any vacuum line with a T
 

KnuckleBuster

Full Access Member
Joined
Jun 15, 2023
Posts
61
Reaction score
68
Location
USA
First Name
Floyd
Truck Year
1969
Truck Model
C10
Engine Size
350
Apologies if this has been asked before but I couldn’t seem to find an answer after a bunch of searching.

in my 81 Cheyenne, there’s a hard line running from the vacuum source in the carb to the power brake booster. Mine is absolutely crushed and obviously not working any longer but I simply cannot find a direct replacement at the usual places. Plenty of rubber lines, but nothing exactly the same at the parts stores or Rock Auto. I did find one site that I’ve never dealt with that did have them I’d feel a lot more comfortable getting it from a reputable and known site.

am I searching for the wrong thing or is it a needle in a haystack? Or should I just be replacing it with a rubber line?

thanks in advance.

First off, I like to keep things original, so I would use a metal pipe like the one it came with. You won't likely find one at a parts house. Best bet for an original is an antique junkyard. There are plenty of places online that sell used parts, as well as restoration parts. You didn't give the vehicle specifics, but it looks like LMC Truck has what you need for just under $20.

You can use a rubber hose. Lots of people do. But if the factory thought that was the best option they could have saved a fortune by using rubber instead of a steel pipe on millions of vehicles. The reason they did that was because steel pipes don't collapse under vacuum, which could cause a loss of power assist to the brakes. Aged rubber does collapse. Aged steel does not.

Good luck!
 

Forum statistics

Threads
44,401
Posts
956,720
Members
36,714
Latest member
MartinK5
Top