labbetheking
Full Access Member
- Joined
- Jul 28, 2015
- Posts
- 52
- Reaction score
- 30
- Location
- Sweden
- First Name
- Daniel
- Truck Year
- 1978
- Truck Model
- c10
- Engine Size
- 383
My pickup truck has been sitting in the garage for 3years now and with 3 little kids the time hasn't been on my side. But now is the time to get this car on the road again!
The problem was that when i was going to install my new ministarter the engine block cracked on one of the bolts.
I've pulled the engine and is on my was to fix that problem.
The things i need your help and opinion on is all the parts i've laying around in the garage.
Got these things to put on:
Heads: Trick Flow Kenny Duttweiler 195 (A181)
Intake: Edelbrock performer eps
Camshaft: Lunati 60102lk https://www.summitracing.com/parts/lun-60102lk
Headers: Some summitracing ones i think
Got some 1.6 roller rockers
Think i will throw my edelbrock carb in the trashcan and order an holley sniper kit aswell.
Will i be ok with this if my bottom end seems ok (haven't opened up yet)
and will the th350 tranny handle it?
The problem was that when i was going to install my new ministarter the engine block cracked on one of the bolts.
I've pulled the engine and is on my was to fix that problem.
The things i need your help and opinion on is all the parts i've laying around in the garage.
Got these things to put on:
Heads: Trick Flow Kenny Duttweiler 195 (A181)
Intake: Edelbrock performer eps
Camshaft: Lunati 60102lk https://www.summitracing.com/parts/lun-60102lk
Headers: Some summitracing ones i think
Got some 1.6 roller rockers
Think i will throw my edelbrock carb in the trashcan and order an holley sniper kit aswell.
Will i be ok with this if my bottom end seems ok (haven't opened up yet)
and will the th350 tranny handle it?
