MOguy
Full Access Member
- Joined
- Nov 17, 2015
- Posts
- 58
- Reaction score
- 14
- Location
- Missouri
- First Name
- Ross
- Truck Year
- 1979
- Truck Model
- K30
- Engine Size
- 350
i need some new bushing for the body mounts.
My cab is surprisingly rust free, it was pretty easy to loosen the bolts.
Should I go poly or rubber? I read a post here and they seemed to think the poly were thinner. Do the rubber compress and end up the same height as the poly ones once mounted? i don't need a body lift but I have saddle tanks and want to make sure i have plenty of clearance.
I see synergy pop up allot.
I did a body lift on my jeep and I just did one side at a time using a high lift. It was pretty simple. Should it be the same for my K30?
My cab is surprisingly rust free, it was pretty easy to loosen the bolts.
Should I go poly or rubber? I read a post here and they seemed to think the poly were thinner. Do the rubber compress and end up the same height as the poly ones once mounted? i don't need a body lift but I have saddle tanks and want to make sure i have plenty of clearance.
I see synergy pop up allot.
I did a body lift on my jeep and I just did one side at a time using a high lift. It was pretty simple. Should it be the same for my K30?