Are there weatherstrip seals that you need which are not produced

[1ATony]

Our weatherstrip manufacturer will be at our office tomorrow. I wanted to ask you guys if there are any weatherstrip seals that you need that aren't available to you, and if so, what year range, model and series did you need them for.

Best Regards,
Tony

 

[1987 GMC Jimmy]

Do you do the upper DS/PS window felts and the rear window sweep and upper felt for a Blazer?

 

[1ATony]

Do you do the upper DS/PS window felts and the rear window sweep and upper felt for a Blazer?

What year Blazer do you need these for ?

Thanks,
Tony

 

[skysurfer]

+ rep given for asking the question.

 

[1987 GMC Jimmy]

what year blazer do you need these for ?

Thanks,
tony

1987

 

[yevgenievich]

having hard time finding a seal that is behind the window frame on the back of a tailgate suburban.

 

[gmachinz]

I make my own now but accurately reproduced splash shields (with a thicker Mylar material) would be pretty nice! Precut to fit the door shell with the correct adhesion material.

 

[1ATony]

1987

Are you looking for the inner and outer window sweeps, and then the run channel that fits up and into the window frame on the door

Here's a link to them https://www.1aauto.com/window-sweep..._campaign=1ATony&utm_medium=ForumWeatherstrip

like this (outlined in red)

You must be registered for see images attach

 

[1987 GMC Jimmy]

I figured you had those, but I need the sweeps and felt for the back window.

 

[Square head]

wondering about the seals that surround the hood hinges where they go through the cowl. They appear to have a piece of metal sandwiched between the top and bottom of the seal.
I have yet to see these available from any of the after market suppliers.
I am restoring a 1987 K20 4X4.

 

[1ATony]

wondering about the seals that surround the hood hinges where they go through the cowl. They appear to have a piece of metal sandwiched between the top and bottom of the seal.
I have yet to see these available from any of the after market suppliers.
I am restoring a 1987 K20 4X4.

ok, thanks for the reply

Tony