Ronno6
Full Access Member
- Joined
- May 14, 2018
- Posts
- 438
- Reaction score
- 126
- Location
- South Mississippi
- First Name
- Ron
- Truck Year
- 1984
- Truck Model
- C10
- Engine Size
- 355
What an absolute, royal PIA..........
Anyone Ever replace a Firewall Insulation Pad ??
- Thread starter Ronno6
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Corvette Ed
Full Access Member
- Joined
- Nov 29, 2020
- Posts
- 3,861
- Reaction score
- 14,647
- Location
- East Tennessee
- First Name
- Eli
- Truck Year
- 79
- Truck Model
- C10
- Engine Size
- 250
I imagine it would be.
Raider L
Full Access Member
- Joined
- Sep 1, 2020
- Posts
- 1,892
- Reaction score
- 1,001
- Location
- Shreveport, LA
- First Name
- William
- Truck Year
- 1974
- Truck Model
- C10
- Engine Size
- 355
@Ronno6,
Yes, I have. But it wasn't that bad due to having taken everything out of the dash because I was rebuilding the truck. And when it came time to begin the interior back in the firewall pad was the first thing back in. My original one was in great shape so I just reused it. My truck is a '74 C10 and the rebuild took place in '94, '95. So twenty years wasn't that long since factory install and the truck was not abused at all. I'm the second owner and the pad was not all cracked or missing pieces.
Now, I can see if you had all kinds of stuff still attached and wires and hoses and steering column still in and all that still in the truck it would be a PIA. I've looked at new aftermarket ones in my catalogs from places that have accurate reproductions and there aren't any splits for it to slide down over stuff. Oh no, it's one piece and everything would need to come out or you'd have to make splits to slide it down but even then it would be hard. I can see where you'd need to remove parts and glue it back when you were through. Man!
Yes, I have. But it wasn't that bad due to having taken everything out of the dash because I was rebuilding the truck. And when it came time to begin the interior back in the firewall pad was the first thing back in. My original one was in great shape so I just reused it. My truck is a '74 C10 and the rebuild took place in '94, '95. So twenty years wasn't that long since factory install and the truck was not abused at all. I'm the second owner and the pad was not all cracked or missing pieces.
Now, I can see if you had all kinds of stuff still attached and wires and hoses and steering column still in and all that still in the truck it would be a PIA. I've looked at new aftermarket ones in my catalogs from places that have accurate reproductions and there aren't any splits for it to slide down over stuff. Oh no, it's one piece and everything would need to come out or you'd have to make splits to slide it down but even then it would be hard. I can see where you'd need to remove parts and glue it back when you were through. Man!
eskimomann209
Full Access Member
- Joined
- Jan 9, 2019
- Posts
- 1,849
- Reaction score
- 2,005
- Location
- Modesto
- First Name
- Marcus
- Truck Year
- 1973
- Truck Model
- C10
- Engine Size
- 5.3
When I did my truck I didn’t redo that factory pad. I used the sound deadening mat and some high density padding.
Figured it would do better than that crap from the 70s
Figured it would do better than that crap from the 70s
Ronno6
Full Access Member
- Joined
- May 14, 2018
- Posts
- 438
- Reaction score
- 126
- Location
- South Mississippi
- First Name
- Ron
- Truck Year
- 1984
- Truck Model
- C10
- Engine Size
- 355
I had the heater/AC box out already, and OEM insulation was in tatters.That is what motivated me.
But..........then came steering column, clutch/brake hanger bracket, fuse box, accelerator pedal. etc...etc....etc.....
I'm not as flexible as I used to was.........
But..........then came steering column, clutch/brake hanger bracket, fuse box, accelerator pedal. etc...etc....etc.....
I'm not as flexible as I used to was.........
DanMcG
Full Access Member
- Joined
- Jun 28, 2014
- Posts
- 1,076
- Reaction score
- 1,891
- Location
- Central NY
- First Name
- Dan
- Truck Year
- 1978 1985
- Truck Model
- k10 k10
- Engine Size
- 400 350
What did you use for this? or can you give me a brand to research?
eskimomann209
Full Access Member
- Joined
- Jan 9, 2019
- Posts
- 1,849
- Reaction score
- 2,005
- Location
- Modesto
- First Name
- Marcus
- Truck Year
- 1973
- Truck Model
- C10
- Engine Size
- 5.3
I dunno the brand. My buddy owns a flooring shop and they also do that sound proof studio stuff.
It was basically a roll of high density closed foam.
I’ll see if I can get a brand name from him. It was maybe 1/2” thick.
It was basically a roll of high density closed foam.
I’ll see if I can get a brand name from him. It was maybe 1/2” thick.
Raider L
Full Access Member
- Joined
- Sep 1, 2020
- Posts
- 1,892
- Reaction score
- 1,001
- Location
- Shreveport, LA
- First Name
- William
- Truck Year
- 1974
- Truck Model
- C10
- Engine Size
- 355
@eskimomann209,
How did it go down? Was it adhesive on one side or what? And what was the type "sound deadening" Me to on the info!
How did it go down? Was it adhesive on one side or what? And what was the type "sound deadening" Me to on the info!
eskimomann209
Full Access Member
- Joined
- Jan 9, 2019
- Posts
- 1,849
- Reaction score
- 2,005
- Location
- Modesto
- First Name
- Marcus
- Truck Year
- 1973
- Truck Model
- C10
- Engine Size
- 5.3
I used the Kilmat first. The second stuff was not sticky it was in a roll. I used the heater core and the fuse box to hold it into position. Plus the dash supporting mounts held it up too.
Like this stuff!
Xtrm Ply SoundSafe Mass Loaded Vinyl (MLV) 4.5 ft. x 10 ft. Soundproofing Acoustic Barrier Roll 7102-11054-10 - The Home Depot
Sound Safe is a reinforced, smooth, flexible mass loaded vinyl (MLV) soundproofing acoustic barrier specifically designed to reduce noise transmission through floors, walls and ceilings and for use as
www.homedepot.com
Like this stuff!
Last edited:
