Anybody wanna help me figure out what these plugs are for?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HMS88

Junior Member
Joined
Sep 27, 2022
Posts
2
Reaction score
0
Location
WA
First Name
Harlan
Truck Year
1983
Truck Model
k20
Engine Size
350
Hey everybody new member long time lurker. I need help figuring out what these wire plugs are for, if they are needed and any other helpful info. I've been scouring the forums and google but haven't been able to see a solution for myself. It appears the PO of my truck did some self wiring that I can't figure out. They added a trailer break controller that seems to be powered on, removed the emissions/smog gear. Sorry for my ignorance im still learning a lot about the truck. Anyways any help will be greatly appreciated.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

85K304SPD

Full Access Member
Joined
Mar 29, 2022
Posts
472
Reaction score
702
Location
Las Cruces, NM
First Name
Richard
Truck Year
1985
Truck Model
K30
Engine Size
402
A good wiring diagram will tell you what those wires are. I have found them on the Autozone site. You can probably find them in other places as well. Usually the plugs will only plug into one thing, so its a process of elimination. Also they usually only reach where they are supposed to plug into. Good luck.
 

SirRobyn0

Full Access Member
Joined
Dec 6, 2019
Posts
6,755
Reaction score
11,402
Location
In the woods in Western Washington
First Name
Rob
Truck Year
1984
Truck Model
C20
Engine Size
305
Since this is your first post, Welcome fellow Washingtonian! I'm going to echo what Richard said, hit the wiring diagrams. It's possible someone might come along that just so happens to know what those connectors are for but probably not. I assume from the third picture they are all under the dash? Sometimes there are unused connectors depending on the options on the truck. Hit the diagrams to find out.
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,451
Reaction score
3,819
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
I’m pretty sure the top photo is the plug for the factory radio speakers.

Does your truck have cruise?

You didn’t mention the year, I’m guessing probably 83ish and up?

The second photo looks like where the cruise control lever would plug in.

The 3rd pic is speed sensor. I think there is a green box somewhere that will plug into. If you have the dash cluster out im pretty sure the optical sensor bolts the the back of the speedometer, follow that harness and you will find the green box (speed buffer) that last plug should fit that box.
 

HMS88

Junior Member
Joined
Sep 27, 2022
Posts
2
Reaction score
0
Location
WA
First Name
Harlan
Truck Year
1983
Truck Model
k20
Engine Size
350
Sorry for the late response I didn't think anyone else had responded.
Since this is your first post, Welcome fellow Washingtonian! I'm going to echo what Richard said, hit the wiring diagrams. It's possible someone might come along that just so happens to know what those connectors are for but probably not. I assume from the third picture they are all under the dash? Sometimes there are unused connectors depending on the options on the truck. Hit the diagrams to find out.
Thanks for the help, yes you're correct all the plugs are under the dash. Also hello from Olympia!
I’m pretty sure the top photo is the plug for the factory radio speakers.

Does your truck have cruise?

You didn’t mention the year, I’m guessing probably 83ish and up?

The second photo looks like where the cruise control lever would plug in.

The 3rd pic is speed sensor. I think there is a green box somewhere that will plug into. If you have the dash cluster out im pretty sure the optical sensor bolts the the back of the speedometer, follow that harness and you will find the green box (speed buffer) that last plug should fit that box.
I think you have nailed the ID of the plugs. My trucks an 83, has an aftermarket stereo deck so that would make sense why that plug is not used. Also the truck doesn't have cruise I believe it was removed when the column was swapped and don't think it was operational. As for the 3rd plug I will do some more research on the speed sensor. I have two dash clusters one has the part your describing and the other does not. Really appreciate your reply!
Welcome to the forums!
you can find your wiring diagrams here;
Thanks Dan I've downloaded these and have been working through them. I'm definitely not a wiring expert, I can follow the stock diagrams fairly good but I start getting lost when I get to a spot where the colors don't match up. I realize that's the point where the PO has done some modifications. I think Matt may have figured it out though.

Thanks again everyone for the help really appreciate this forum and everyone's knowledge!
 

scrap--metal

Full Access Member
Joined
Sep 15, 2021
Posts
691
Reaction score
1,314
Location
MN
First Name
Calvin
Truck Year
'85, '81
Truck Model
K10, K20
Engine Size
305, 350
I’m pretty sure the top photo is the plug for the factory radio speakers.

Does your truck have cruise?

You didn’t mention the year, I’m guessing probably 83ish and up?

The second photo looks like where the cruise control lever would plug in.

The 3rd pic is speed sensor. I think there is a green box somewhere that will plug into. If you have the dash cluster out im pretty sure the optical sensor bolts the the back of the speedometer, follow that harness and you will find the green box (speed buffer) that last plug should fit that box.
Impressive :cool:
 

SirRobyn0

Full Access Member
Joined
Dec 6, 2019
Posts
6,755
Reaction score
11,402
Location
In the woods in Western Washington
First Name
Rob
Truck Year
1984
Truck Model
C20
Engine Size
305
Sorry for the late response I didn't think anyone else had responded.

Thanks for the help, yes you're correct all the plugs are under the dash. Also hello from Olympia!

I think you have nailed the ID of the plugs. My trucks an 83, has an aftermarket stereo deck so that would make sense why that plug is not used. Also the truck doesn't have cruise I believe it was removed when the column was swapped and don't think it was operational. As for the 3rd plug I will do some more research on the speed sensor. I have two dash clusters one has the part your describing and the other does not. Really appreciate your reply!

Thanks Dan I've downloaded these and have been working through them. I'm definitely not a wiring expert, I can follow the stock diagrams fairly good but I start getting lost when I get to a spot where the colors don't match up. I realize that's the point where the PO has done some modifications. I think Matt may have figured it out though.

Thanks again everyone for the help really appreciate this forum and everyone's knowledge!
I'm a bit north and east of you out highway 2 and then North and East of Monroe.
 

Latest posts

Forum statistics

Threads
44,157
Posts
950,596
Members
36,272
Latest member
armchair
Top