Catbox
Full Access Member
- Joined
- Jul 12, 2018
- Posts
- 4,473
- Reaction score
- 16,797
- Location
- Just Outside of Portland Oregon
- First Name
- Peter
- Truck Year
- 1979
- Truck Model
- C20 Silverado Camper Special
- Engine Size
- 461
I recently purchased a set of 1/4" drive torx bits from Harbor Freight.
While at the junkyard, I put the big one to the test.
I first tried it with my 1/4 inch Makita driver and it wouldn't budge the seatbelt bolt.
Then I used the Milwaukie 1/4 inch impact driver and it had all the poop that was needed.
The bit stayed in one piece and worked quite well.
I would recommend them for sure for just that purpose.
While at the junkyard, I put the big one to the test.
I first tried it with my 1/4 inch Makita driver and it wouldn't budge the seatbelt bolt.
Then I used the Milwaukie 1/4 inch impact driver and it had all the poop that was needed.
The bit stayed in one piece and worked quite well.
I would recommend them for sure for just that purpose.
You must be registered for see images attach