CountKrunk
Full Access Member
- Joined
- Aug 3, 2023
- Posts
- 361
- Reaction score
- 845
- Location
- SW VA
- First Name
- Count
- Truck Year
- 1984
- Truck Model
- C20 Custom Deluxe 3+3
- Engine Size
- v8 350
any luck getting the right parts in?
Aftermarket cruise control install ..
- Thread starter dragstews
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
dragstews
Full Access Member
- Joined
- Mar 27, 2024
- Posts
- 180
- Reaction score
- 536
- Location
- Belleview Florida US of A
- First Name
- Jesse
- Truck Year
- Body 1954, frame 1975
- Truck Model
- R-100
- Engine Size
- 406 ci SBC
! Holy Ghost Truck, Batman !
Think I found a seal in Michigan ??
Not sure it's the right one cause it's for the NP 205 ..
Ad showed two different size seals ..
One had a .500" O.D. and the other was bigger .625".
My 203 has the .500" ... Pulled the trigger for it ..
Seems like getting parts for this truck turns into a adventure !!
Think I found a seal in Michigan ??
Not sure it's the right one cause it's for the NP 205 ..
Ad showed two different size seals ..
One had a .500" O.D. and the other was bigger .625".
My 203 has the .500" ... Pulled the trigger for it ..
Seems like getting parts for this truck turns into a adventure !!
You must be registered for see images attach
Last edited:
dragstews
Full Access Member
- Joined
- Mar 27, 2024
- Posts
- 180
- Reaction score
- 536
- Location
- Belleview Florida US of A
- First Name
- Jesse
- Truck Year
- Body 1954, frame 1975
- Truck Model
- R-100
- Engine Size
- 406 ci SBC
installed the polished cover ..
I'm sure the turn signal lever is way to long ..
Will cut it down once I get the column back together and get a good look at what needs to be done ...
Still working on the steering wheel adapter ...
I'm sure the turn signal lever is way to long ..
You must be registered for see images attach
Will cut it down once I get the column back together and get a good look at what needs to be done ...
Still working on the steering wheel adapter ...
