82sierradude
Junior Member
- Joined
- Jun 15, 2017
- Posts
- 8
- Reaction score
- 3
- Location
- Pacific NW
- First Name
- Ben
- Truck Year
- 1982
- Truck Model
- C2500
- Engine Size
- 5.7
The switch for the AC blower needs to be replaced, as it developed a short and melted the plastic part inside it. I discovered that the AC system is an aftermarket A-R-A Manufacturing kit, which is no longer available. The wiring harness and switch were built to control both the heater and AC blowers, and the switch has an unusual array of nine terminals vs the normal four terminals for trucks with factory AC.
Question: Does anyone know where I can find this switch? The part number on the lever is 0317858. I found one truck in a salvage yard that had the same setup, but the switch was taken. ☹ I've tried LMC and Classic, but neither had anything comparable.
Thanks
Question: Does anyone know where I can find this switch? The part number on the lever is 0317858. I found one truck in a salvage yard that had the same setup, but the switch was taken. ☹ I've tried LMC and Classic, but neither had anything comparable.
Thanks
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach