89'S '07 Hoe

[animal]

That is one sexy bish.....Not a bad looking "HOE" either

 

[Honky Kong jr]

You must be registered for see images attach

You must be registered for see images attach

New tars and range technology afm disabler installed.

Looks less like a soccer mom mobile now.

 

[Old77]

 

[89Suburban]

For all the "fuel pump through the floor haters".

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[89Suburban]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[HotRodPC]

For all the "fuel pump through the floor haters".

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Doing it the right way !!! Good Job Bro !!! F those haters !!!

 

[HotRodPC]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

What a shame man. That PA rust is some serious $hit. I'da moved already. I love vehicles way to much to live there and watch them be eaten' up.

 

[HotRodPC]

Oh my what happened @89Suburban. You're looking a little blue these days. Take a deep breath buddy.

 

[89Suburban]

Spent the weekend putting in a suspension drop and some PPV wheels.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[animal]

You be looking like the "popo"

 

[IdahoJOAT]

The OP thing, ever work that out?

On my 09 Avvy I had this issue and it was the OP sensor screen plugging up. One can do it without pulling the intake with a 3/8" u-joint and a pick.

 

[bucket]

Spent the weekend putting in a suspension drop and some PPV wheels.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Gawd damn!! That's looking awesome!

 

[HotRodPC]

Spent the weekend putting in a suspension drop and some PPV wheels.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Yep, Looking like the Po Po fo sho. Everyone going to be slowing down in front of you now.

 

[89Suburban]

The OP thing, ever work that out?

On my 09 Avvy I had this issue and it was the OP sensor screen plugging up. One can do it without pulling the intake with a 3/8" u-joint and a pick.

I had to pull the intake and replace the VLOM assembly so I did the sensor and screen while it was apart. Those VLOM bolts are know to come loose and start leaking oil both internally and externally. The was another cause of the low oil pressure. And can be a cause of lifter failure. Ran much better with the new one installed and torqued down. I also run a Range device to bypass the V4 mode that kills these motors.

Yep, Looking like the Po Po fo sho. Everyone going to be slowing down in front of you now.

Not really I was doing 75 in the right lane of a 55 last night and they were still blowing my doors off. What I do get is a lot of complete stops and wave throughs at stop signs and cross walks though LOL.

 

[Bextreme04]

What was the reason for the fuel pump change? Did the old one fail or were you getting some other issues?