55 top speed
- Thread starter Mandoguy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Frankenchevy
Proverbs 16:18
- Joined
- Jan 3, 2018
- Posts
- 6,113
- Reaction score
- 7,836
- Location
- USA
- First Name
- Jeremy
- Truck Year
- Square
- Truck Model
- CUCV
- Engine Size
- Small
Make sure everything is functioning properly. If your top speed is 55, something is wrong or you’ve put 13” Dayton’s on since the avatar pic.
Then either get a taller tire or taller gearing.
Then either get a taller tire or taller gearing.
Mandoguy
Junior Member
- Joined
- Mar 16, 2019
- Posts
- 4
- Reaction score
- 0
- Location
- Kentucky
- First Name
- Jason
- Truck Year
- 1981
- Truck Model
- K20
- Engine Size
- 5.7 v8
I removed my rear diff cover and the spider gears where chewed up but the ring and pinion looks good.thought of going with a 3:73 but don’t want to loose the torque.
Charlie
Mopar by Birth. Chevy by Choice.
- Joined
- Aug 2, 2017
- Posts
- 1,837
- Reaction score
- 915
- Location
- Euless, Texas
- First Name
- Don
- Truck Year
- 1974
- Truck Model
- Cheyenne 10 LWB
- Engine Size
- 350/TH350/AC/4 BBL Quadrajet
Frankenchevy
Proverbs 16:18
- Joined
- Jan 3, 2018
- Posts
- 6,113
- Reaction score
- 7,836
- Location
- USA
- First Name
- Jeremy
- Truck Year
- Square
- Truck Model
- CUCV
- Engine Size
- Small
What’s the hp/tq of your engine? Pic looks like 285/75r16. Is that accurate?
78C10BigTen
Full Access Member
- Joined
- Apr 12, 2017
- Posts
- 16,088
- Reaction score
- 25,855
- Location
- pennsylvannia
- First Name
- Ted
- Truck Year
- 1978
- Truck Model
- C10 BIG TEN
- Engine Size
- 350
Ive always been confused on that statement..... wich way is taller from 411? I always hear guys debate wich way taller means? I went from 308 to 342, did i go taller or shorter? Just want a lil clarification.
- Joined
- Aug 3, 2010
- Posts
- 30,830
- Reaction score
- 29,497
- Location
- Usually not in Ohio
- First Name
- Andy
- Truck Year
- '77, '78, '79, '84, '88
- Truck Model
- K5 thru K30
- Engine Size
- 350-454
You went shorter.
Frankenchevy
Proverbs 16:18
- Joined
- Jan 3, 2018
- Posts
- 6,113
- Reaction score
- 7,836
- Location
- USA
- First Name
- Jeremy
- Truck Year
- Square
- Truck Model
- CUCV
- Engine Size
- Small
I take that back. The rim:sidewall ratio makes it look like a 17” rim...
shiftpro
Full Access Member
- Joined
- Aug 31, 2012
- Posts
- 4,855
- Reaction score
- 6,096
- Location
- BC Canada
- First Name
- shiftpro
- Truck Year
- 73-87
- Truck Model
- 1500, 2500, 3500
- Engine Size
- 350, 383, 454, 496!
Higher number is lower gear ration. Lower number is higher gear ratio. 4.11 is a lower gearing than 3.75.
As the bucket said above, shorter gears (higher #) = lower gear ratio.
I hope I'm not confused by now
climb-101
Full Access Member
- Joined
- Mar 12, 2018
- Posts
- 262
- Reaction score
- 278
- Location
- montana
- First Name
- seth
- Truck Year
- 974
- Truck Model
- c2 crew cab
- Engine Size
- 6.0 LS
what RPM you running. you should be be able to make it to a much higher MPH even with the 4:11 gears but you RPM will be higher.
in my chevelle i ran a th400 and 4:56 and it would run roughly 130mph at 6500 with 28” tall tires. 55mph should be no problem
in my chevelle i ran a th400 and 4:56 and it would run roughly 130mph at 6500 with 28” tall tires. 55mph should be no problem
- Joined
- Aug 29, 2010
- Posts
- 47,132
- Reaction score
- 9,331
- Location
- OKC, OK
- First Name
- HotRod
- Truck Year
- 85 K20 LWB
- Truck Model
- Silverado
- Engine Size
- 454 - Turbo 400 - 3.73
If you want you'r cake and eat it too, as in don't want to lose torque, but want lower rpm at a higher speed, there's only 2 ways to accomplish this. Either taller tires, or overdrive. However, taller tires tend to eat up that torque too. If it's a 2wd, I'd be highly considering a 4L80-E. Gear Vendor is an option too but very expsive not only for the unit itself, but the mods to make it work as in driveshaft work, crossmember moving and/or addition etc.
- Joined
- Aug 29, 2010
- Posts
- 47,132
- Reaction score
- 9,331
- Location
- OKC, OK
- First Name
- HotRod
- Truck Year
- 85 K20 LWB
- Truck Model
- Silverado
- Engine Size
- 454 - Turbo 400 - 3.73
I'm assuming he means 55mph max safe cruising speed. I'd hope to hell he can do over 55. In my old 64 GMC, I had a Th350 without lock up 4.56s and 31in tires. 60 ish was my 3000 ish cruise speed. Of course back then the speed limit was 55 so it wasn't so bad.
dajn37
Full Access Member
- Joined
- Jan 1, 2019
- Posts
- 290
- Reaction score
- 220
- Location
- Minnesota
- First Name
- David
- Truck Year
- 1987
- Truck Model
- R10 scottsdale
- Engine Size
- 305
I know this doesnt help much but the 72 c 10 I used to have, i could cruise 60mph very comfortably. I decided to stand on it once for the hell of it to see if I could bury the speedometer. It would. Fairly easily So it would do an honest 100mph. This pickup had a stock 1972 350 with stock th 350 trans and 3.08 gearing. That was a great pickup. Very fun to drive.
- Joined
- Aug 29, 2010
- Posts
- 47,132
- Reaction score
- 9,331
- Location
- OKC, OK
- First Name
- HotRod
- Truck Year
- 85 K20 LWB
- Truck Model
- Silverado
- Engine Size
- 454 - Turbo 400 - 3.73
I can assure you, it would be even more fun to drive with 4.10's or 3.73's. The difference in pep is night and day especially if you're one of those that's likes to hotrod from stop light to stop light or getting on the freeway without any problem and having enough get up and go to get well ahead of the traffic flow to merge instead of having to let off to let traffic go by so you can duck in behind the traffic flow.
