4 barrel, qjet hook up pics, bay clean up

[roving4s]

I want to clean up the vac tubing mess. There's some stuff there that wasn't hooked up to begin with. I know everyone hates cleaning up the po's ****, when you can't figure out what they did.

84 k10 350/350. All the big stuff like fuel,pcv are fine. I went to change the gasket (which was broken and all that held the carb down was 2 long rear bolts). There's 1 line running from the rear of the engine, 1 cable with spring, 1 that connects to the front passenger side of the car- that end is connected to another fitting beside it on the carb.

Then the egr **** is a mess. Already ordered a block off plate- wasn't working anyways not with all the solid black crud/gum in it.

I'd like to run it with only what's required and yank the rest of the ****.

Not used to carbs- or sbc so pics would be great Thanks.

 

[chengny]

You must be registered for see images attach

You must be registered for see images attach

 

[Boone83K10]

Wow it does sounds like I need to come help a feller out.

 

[roving4s]

Wow it does sounds like I need to come help a feller out.

lol I wanna get this thing squared away. Other wise I won't it far from home.

 

[roving4s]

......

Thanks exactly what I wanted.

 

[gpmorgan]

If you don't have to wory about emission tests, I would get rid of everything but what I needed.
Vacuum to brake booster.
Vacuum to dizzy.
Accel cable.
TV cable to trans.

 

[Boone83K10]

There is no emissions in NC for vehicles older than 1996. After a vehicle is older than 35 years you don't even have to get a safety inspection.

 

[gpmorgan]

I can understand doing away with the emission test on an older vehicle. I'm not sure I understand doing away with a safety test on a 35 year old vehicle though. Seems that would be when they needed it the most.

 

[roving4s]

There is no emissions in NC for vehicles older than 1996. After a vehicle is older than 35 years you don't even have to get a safety inspection.

That's why I keep getting older ones Besides who needs all that ecu **** ?

Newest I've ever owned was a 97, this chevy is the oldest and first factory solid axle.

 

[gpmorgan]

That's why I keep getting older ones Besides who needs all that ecu **** ?

I agree. That's why my 92 looks like this.

http://www.holley.com/VirtualShow/chevy/silverado/2607.asp

 

[roving4s]

Got most of it cleaned up, got 1 that run's out of the firewall pass side beside the ac box. Dunno where it goes, got a couple others but it's running , something went wrong with the valve cover on drivers side rear, it's leaking like a ****.

 

[Boone83K10]

Got most of it cleaned up, got 1 that run's out of the firewall pass side beside the ac box. Dunno where it goes, got a couple others but it's running , something went wrong with the valve cover on drivers side rear, it's leaking like a ****.

is it pretty small? if so that would be the vacuum for the blend door inside the heater box.

 

[towjoe]

we currently have no emission or safety inspections here. Only on commercial trucks. I think there should be a safety inspection tho, I get a ton of junks in that haven't been safe for a long while. I done a tow today that had tires so rotten I was afraid to even tow it and the girl drives it everywhere and doesn't care how dangerous it is for her and her 3 kids

 

[roving4s]

is it pretty small? if so that would be the vacuum for the blend door inside the heater box.

Yeah Thanks,