2WD 3/4T lift?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

belay70

Junior Member
Joined
Feb 8, 2013
Posts
28
Reaction score
0
Location
Kansas City
First Name
Michael
Truck Year
1979
Truck Model
C20
Engine Size
350
I know it sounds dumb, lifting a 2WD. But Id like to lift the front end especially, back end doesnt matter so much. Id like it to stand a little prouder.

Do they even make lift kits for the front end of a 2WD truck?
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
taller/stiffer springs
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Taller/Stiffer springs does not always work. The distance between upper and lower ball joints is determined by the spindle assembly itself. All a taller spring will probably do is make it a stiffer ride, not lift it, unless it's got tired springs.

I've seen ball joint assemblies that will offer some lift without changing out the spindles all together. An inch or 2 is about all you'll get that way though.
 

belay70

Junior Member
Joined
Feb 8, 2013
Posts
28
Reaction score
0
Location
Kansas City
First Name
Michael
Truck Year
1979
Truck Model
C20
Engine Size
350
yeah, an inch or two is all I need/want. perhaps new front susp components will do this anyway and what I saw was just tired old parts letting her front sag. But, if you know of any parts specifically, please do tell. As long as Im buying the parts, might as well get those. thx
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
yeah, an inch or two is all I need/want. perhaps new front susp components will do this anyway and what I saw was just tired old parts letting her front sag. But, if you know of any parts specifically, please do tell. As long as Im buying the parts, might as well get those. thx

It is very possible that NEW untired springs will do what you want.
 

chevyk10

Full Access Member
Joined
Jan 31, 2014
Posts
358
Reaction score
6
Location
WV
First Name
Daniel
Truck Year
1984 chevy
Truck Model
k-10
Engine Size
358 Dart block with aluminum heads 430hp/450ft-lb torque
Definitely use new springs and if a little extra is needed you may use an airbag that goes inside the spring.


Sent from my iPhone using Tapatalk
 

72chevy2door

Full Access Member
Joined
Mar 19, 2014
Posts
193
Reaction score
24
Location
Florida
First Name
Jeff
Truck Year
1988
Truck Model
1500 Sierra Classic suburban
Engine Size
350
Me and my brother did a suspention lift on his 2wd 1500 suburban. We used 3/4 ton suburban springs. Bought them new at the parts store and 2in. lift blocks for the back. Lifted it two inches and it cleared 33-12.50r15 with close but no touching unless it's flexed out on a major incline. It was a cheap lift and he was happy. It rode rough because the front upper control arms where at the bump stops on frame. Might of got more lift if we shaved them down.
 

1low4x4

Full Access Member
Joined
Feb 14, 2011
Posts
2,409
Reaction score
716
Location
Texas
First Name
Nick
Truck Year
1984
Truck Model
K10
Engine Size
5.7
Moog Part # 6454 from oreillys gained 2". Will settle with time about 1/2". Will be purchasing ride rite helper bag kit off summit for rear cause it squats now when towing. Noticed hardly no change in ride wuality up front

You must be registered for see images attach
 

Michael

Member
Joined
Oct 14, 2015
Posts
35
Reaction score
0
Location
Erie pa
First Name
Michael
Truck Year
1984
Truck Model
Scottsdale c10
Engine Size
305
Hi new to this page I have a 84 c10 I was wondering what kind of tires your running like the size and also what kind if air bags
 

Forum statistics

Threads
44,173
Posts
950,874
Members
36,290
Latest member
Pilotanpia
Top