208 Milky fluid

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

K5Rob

Member
Joined
Dec 1, 2024
Posts
37
Reaction score
8
Location
Maine
First Name
Rob
Truck Year
1987
Truck Model
K5 Blazer
Engine Size
350
I noticed milky fluid on the outside of my np208, on the bottom and by the output shaft seal. This truck is new to me. When i bought it i saw the same fluid leak but it was clean, not milky.

Today i popped the top cap and checked fluid with an allen wrench and the fluid inside is clean. My thought was if i saw milky fluid on the outside, then the inside would be emulsified and not just water on the bottom but i am unsure. I dont have enough fluid on hand to drain and refill. The truck is gonna sit until spring. Not registered. I am new to 4x4s.

Is it possible for fluid on the outside to get milky from condensate ?? Seems strange to me. I dont wanna drain and refill, or leave empty, I am going to pull the tcase anyway this spring but dont want it to freeze either. What are your thoughts?
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,605
Reaction score
6,858
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
If you suspect water in the case you can unthread the drain plug and hold it tight when it get the to the last thread and slowly tilt the plug away just enough to let fluid flow. You’ll know quick if water immediately comes out or red transmission fluid.

Got any pictures of the case with the fluid in question?
 

K5Rob

Member
Joined
Dec 1, 2024
Posts
37
Reaction score
8
Location
Maine
First Name
Rob
Truck Year
1987
Truck Model
K5 Blazer
Engine Size
350
If you suspect water in the case you can unthread the drain plug and hold it tight when it get the to the last thread and slowly tilt the plug away just enough to let fluid flow. You’ll know quick if water immediately comes out or red transmission fluid.

Got any pictures of the case with the fluid in question?
I didnt take pics but if the fluid is milky wouldnt that mean that its emulsified. Or
Would the water separate and rest at the bottom after a while ??
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,090
Reaction score
3,062
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Rather common, especially with front diffs that haven't been used enough. Condensation and no heat to burn water off. Water will usually emulsify.

Check the vent, drain and refill.
 

K5Rob

Member
Joined
Dec 1, 2024
Posts
37
Reaction score
8
Location
Maine
First Name
Rob
Truck Year
1987
Truck Model
K5 Blazer
Engine Size
350
Thanks guys. I did pop the bottom for a second and ran clean. Pretty confident its clean inside now.
 

Old Guy Bill

Full Access Member
Joined
Sep 10, 2023
Posts
441
Reaction score
1,362
Location
KY
First Name
Bill
Truck Year
1978
Truck Model
K20
Engine Size
400
Check the vent on the top, it’s a bent metal tube with a short piece of hose and vent cap.
 

Latest posts

Forum statistics

Threads
44,401
Posts
956,668
Members
36,710
Latest member
GreenbloodedAmazo
Top