1995 S10 est wire location?

[squaredeal91]

1995 vortec 4.3 with tbi style distributor. I can't find the est disconnect wire. I know what it looks like but where is it ? @bucket you know about these dimes right?

 

[gmbellew]

Didn't they move that inside the cab, maybe under the dash or behind the glove box, in the later TBIs?

 

[squaredeal91]

Underhood area. I looked behind passenger side kick panel and no dice. I wish they had it in the same place every time lol

 

[Catbox]

Gotta love when the engineers change something for the because of it every new model year.
We have a '92 Camaro with some one year only crap on it.
If I were to do it again, I would have told her to find an '89 to miss all the one off crap.

 

[squaredeal91]

This thing is pretty interesting. No glove box?? But it has a center console lol. Okay so I set it where I thought the original one used to be. Fired right up. First time I've ever heard it run before. Surged a little then once warmed up a bit I adjusted by hand and let it run some more. Idles around 6 or 700rpm warm. Runs acts and drives great! No engine light on.
I'd say it's close to perfect. I'm not with the vehicle anymore but will be going back in a week and would like to have some solid leads of where to look when I go back so I can be sure timing is correct.

 

[gmbellew]

Timing Disable Wire Connection - Blazer Forum - Chevy Blazer Forums

2nd Generation S-series (1995-2005) Tech - Timing Disable Wire Connection - 1995 GMC Jimmy SLT 4.3 L Vortek 4WD Where do I find the Timing Disable wire connection that is unconnected / reconnected when resetting timing back to 0 degrees or when a distributor has been changed or other timing...

blazerforum.com

 

[squaredeal91]

Timing Disable Wire Connection - Blazer Forum - Chevy Blazer Forums

2nd Generation S-series (1995-2005) Tech - Timing Disable Wire Connection - 1995 GMC Jimmy SLT 4.3 L Vortek 4WD Where do I find the Timing Disable wire connection that is unconnected / reconnected when resetting timing back to 0 degrees or when a distributor has been changed or other timing...

blazerforum.com

Thank you! I'll add that to the check list. Sounds likely to be it too

 

[bucket]

Gotta love when the engineers change something for the because of it every new model year.
We have a '92 Camaro with some one year only crap on it.
If I were to do it again, I would have told her to find an '89 to miss all the one off crap.

Yeah, but those '92-only features are good ones. It's well worth it.