1977 c30 cab and chassis

[highdesertrange]

sure I will sell them. the only catch is they are in Arizona and I am in Kalifornia at the moment. it will be a couple of weeks before I could get them. I have lots of parts in Arizona. highdesertranger

 

[78C10BigTen]

sure I will sell them. the only catch is they are in Arizona and I am in Kalifornia at the moment. it will be a couple of weeks before I could get them. I have lots of parts in Arizona. highdesertranger

Pm me. My interest is peaked!

 

[PrairieDrifter]

It should have 56" long springs in either an 8/1 or 9/1 set up. I looked at SD Truck Springs and the 8/1 is the same for my K30 SRW. This truck will have the narrower spring hangers like mine. If I recall, the chassis cab has a 14 bolt rear vs the Dana 70. It should have the 3.5" wide rear brake shoes/drums. I'd be interested to find out if your drums are closer to the spring than mine.

You must be registered for see images attach

You must be registered for see images attach

My drums are definitely closer, I’d say less than an inch of clearance lol

 

[PrairieDrifter]

A cab&chassis truck has the drums much closer to the springs. Changing a wheel cylinder or even bleeding the brakes can be a challenge due to the lack of room.

It is a very tight squeeze..

 

[Craig 85]

Do the chassis cabs have the 131.5" wheel base like long bed trucks? Here's an idea since you have the narrowed rear axle. This is a short bed, but I'd rather have a long bed.

You must be registered for see images attach

 

[PrairieDrifter]

Do the chassis cabs have the 131.5" wheel base like long bed trucks? Here's an idea since you have the narrowed rear axle. This is a short bed, but I'd rather have a long bed.

You must be registered for see images attach

No they dont, I know they are definitely longer, can’t remember the measurement though. I’ll have to find it or, I’ll get a tape measure on it anyways to see what it is