15x10 Steelies

[Zayshley]

On the fence about ordering a set of 15x10 Steelies off Coker Tire (about $1200 CAD + finding hubcaps). Currently running a set of 16x10 Centerline Pro Convo’s on 315/75r16’s but I also love the look of the 15x10 steelies. Any opinions?
My truck vs what I’m thinking of doing:

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Zayshley]

My truck before I put the centerlines on:

You must be registered for see images attach

You must be registered for see images attach

 

[FireTruck1984]

My truck before I put the centerlines on:

You must be registered for see images attach

You must be registered for see images attach

White Steelies with caps would be the very best look for your truck !
Go for it !
it’s just such a classic and tough look… and never goes out of style.

@Zayshley Although for your application, 16X8 would be best. A 10” wheel would be too wide. Eckler’s has them

 

[Shorty81]

Love the steelies

 

[ajordan282]

i've been torn for a long time between finding a set of old welds (stone crushers or super singles) and going that route, or ordering some white steelies and using the mint dog dish caps i have.

i would have done the steelies long ago but i realized i had to custom order them to get 3.625" backspace. the width is important to me, I dont want to change the stance of the truck at all and the eagles I have now are 15x10 3.625" BS.

Your truck is so original that I bet the 15x10 with 4.5" BS that coker has would look superb.

 

[Zayshley]

i've been torn for a long time between finding a set of old welds (stone crushers or super singles) and going that route, or ordering some white steelies and using the mint dog dish caps i have.

i would have done the steelies long ago but i realized i had to custom order them to get 3.625" backspace. the width is important to me, I dont want to change the stance of the truck at all and the eagles I have now are 15x10 3.625" BS.

Your truck is so original that I bet the 15x10 with 4.5" BS that coker has would look superb.

I was thinking of getting some Super Singles as well but it’d be a hassle to get them shipped up here since I’m in Canada. I’m just trying to find an excuse to hit the buy button on the steelies. They’re only $1150 CAD compared to a set of 15x12 Super Singles which would cost around $2500 USD + shipping.

 

[ajordan282]

I was thinking of getting some Super Singles as well but it’d be a hassle to get them shipped up here since I’m in Canada. I’m just trying to find an excuse to hit the buy button on the steelies. They’re only $1150 CAD compared to a set of 15x12 Super Singles which would cost around $2500 USD + shipping.

Be aware - I think you’d want 15x10 super singles with the 3.5” backspace. They fit out trucks much better than the 12s, have the same dish, and don’t require as much trimming.

 

[Craig 85]

In case you didn't know, the hub caps/wheels you displayed are 3/4 ton which have a larger diameter. The wheel shown is a 16.5". 1/2 tons have a 5 spoke cap like the picture below.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[evl]

These are 15x10 from wheel vintiques, sold by Summit. About $150 per wheel. I like this combo, but then again, most wheels look good on our trucks

 

[Zayshley]

These are 15x10 from wheel vintiques, sold by Summit. About $150 per wheel. I like this combo, but then again, most wheels look good on our trucks

Do you have a link for them?
Those look really good.

 

[evl]

Do you have a link for them?
Those look really good.

Wheel Vintiques 62-5006042 Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels | Summit Racing

Free Shipping - Wheel Vintiques 62 Series Ford-Chevy Style O.E. Primered Wheels with qualifying orders of $109. Shop Wheels at Summit Racing.

www.summitracing.com