Search results

  1. M

    Best Gasket Sealer

    I read recently about an idea of helping an RTV sealed area not leak. Don't fully torque the bolts, but allow the RTV to "firm up" then torque to spec. I do have to second the Lube Locker gaskets, I have not had one leak yet, and they are reuseable if taken apart carefully.
  2. M

    Can you run Schaeffer 50W oil in a SM465?

    When I was stationed in Idaho, I had a 76 GMC and used the Amsoil in the trans. With regular gear oil it was really hard to shift in the winter. I swapped to the Amsoil and it was so much smoother in the cold, summer time it was even lighter shifting, but it did make a little more noise. I put...
  3. M

    NVU gauges

    I looked at these before I got the Speed Hut gauges. I certainly think they are a nice upgrade from stock guages. The Speed Hut has the blinker & High beam indicator on the speedo also. I only went with the Speed Hut as they had more options for range on speedo & tach and color combinations.
  4. M

    Homemade car trailers

    this is late for this discussion, but, if you want to build a trailer of your own. Check out some of the trailer MFG web sites for info. Many list the material used and you can judge your load requirements to match. I built a 20ft dovetail trailer back in 2000. I used channel for everything...
  5. M

    TrueTrac for rear axle...likes/dislikes?

    I installed Truetrac's in the front & read diffs on my 01 Ram 3500. I do have to add 6-800 lbs between the wheel wells to give the rear tires some weight on them. We don't get much snow in OK, but I do not fear having to drive in it any more. The cummins give the front tires enough weight so...
  6. M

    Rear Shackle Replacements

    ORD has some very good parts but there other options. I bought these. https://diy4x.com/product.php?productid=17708&cat=250&page=4
  7. M

    What tdc tool do y'all recommend?

    https://www.summitracing.com/parts/sng-33650 Mr Gasket or Moroso also make a whistle style. I tried to use the rod version shown in first post, no luck as the dome/valve reliefs on the piston bound up the rod. There is info that recommends the rod style for engines that have the spark plug in a...
  8. M

    Latest thinking on replacement gauges

    These may not be for everyone as the style is not a factory look. This is what I ordered from Speed Hut.
  9. M

    I want a rear sliding window!

    I got a slider from a auto glass shop and it was the single pane slider. I made arrangements to have them do the install after I got it tinted. These days you need the added tint for the sun and those driving behind you with the high beams on
  10. M

    Adding convertor (s). Yes, I said adding.

    YES, long tube headers are going to need either ceramic coating or wrapped to keep heat in to light cat. This is also why most have to use a heated O2 sensor with headers, lack of heat. If you have the space put the cats right after the collector adapter. Trying to be green isn't easy on old stuff.
  11. M

    bearings instead of bushings front control arms

    contact Global West, they make numerous Delrin bushing sets for GM and Ford. You may need measure your control arms so they can possibly match on the shelf parts. I installed a set on my 94 Vette up front. No increase in ride harshness as I didn't change either the shocks or spring rate. The...
  12. M

    I'm taking the plunge....2005 seats in a 76

    I just got a set of 2008 Chevy seats & center seat/console for my 85. My console has the cup holders on the upper lid portion.
  13. M

    Latest thinking on replacement gauges

    I ordered a set of Speed Hut gauges. You can pick from numerous face, lighting, ranges and other options. I've got another 3 weeks or so till they arrive.
  14. M

    1981 El Camino parts runner

    looks like a carter thermoquad
  15. M

    Truck lite 27270c LED upgrade.

    my 85 is a factory single light truck. If your truck is a factory 4 headlight system, you also have to change the core support. Probably easier to get the 4x6 lights.
  16. M

    Truck lite 27270c LED upgrade.

    my 85 is a factory single light truck. If your truck is a factory 4 headlight system, you also have to change the core support. Probably easier to get the 4x6 lights.
  17. M

    Truck lite 27270c LED upgrade.

    I have a set of the Trucklite 5x7 "single" headlights in my 85. They fit the factory headlight bucket with no mods and plugged right into the harness.
  18. M

    destroyed hub- bought new "locking" spindle nuts

    I'm sorry you are having to deal with the damage and repair, but thanks for posting this. I use the Stage 8 spindle locks on 2 diff trucks and was thinking of changing to the Yukon hubs.
  19. M

    Proper way to fix sagging Headliner

    it is plastic not fiberglass. It needs whatever material you want for a surface other than plastic to be attached. No worries about it falling apart like the fiber board factory one. For me, it's the best option for a replacement that I have found.
  20. M

    Proper way to fix sagging Headliner

    Rock auto sells a plastic headliner replacement for about $120 when I got mine. No need dealing with the deteriorated foam board from factory.
  21. M

    Lunati Cams

    https://www.claysmithcams.com/hr-8800-9-csr-bbc-454-to-470-cid-old-school-oem-049-781-heads-to-a-max-of-5700-rpm/ This cam has been used by numerous people in 489 & 496 BBC's with the 049 or 781 heads, rumor has it that Chris Straub designed the profile. If you want to cut thru the typical cam...
  22. M

    Help with 454 decision, picking up today.

    all good points guys. I only mentioned how to visually recognize a tall deck block from std deck, as in his original post the seller had 2 "454's", one of which is clearly a sbc, look at the lifter bores on the orange block. You just don't know who has swapped what into anything, you need to...
  23. M

    Help with 454 decision, picking up today.

    last tidbit for today. MK IV was made until 1991, then came Gen V 1991-1995/6 (has no mechanical fuel pump provision), Gen VI started in 1996 has mech fuel pump and roller cam stock. This came from Wikipedia, so put eyes on part to verify what it is, as you have experienced some folks be...
  24. M

    Help with 454 decision, picking up today.

    going farther down the list you come to "Chevy Truck 20 series (1988 down)= Squarebody trucks, 30 series truck is the 1tons. "select part" = Engine
  25. M

    Help with 454 decision, picking up today.

    https://www.mortec.com/bbc.htm this list has MK IV, Gen V, Gen VI. GM changed the MK designation to GEN designation, what is important is IV, V, VI. TBI to carb is a manifold, carb and fuel pump change away. I think Gen V has no provision for mechanical fuel pump. You need to research which...

Latest posts

Forum statistics

Threads
44,419
Posts
957,218
Members
36,758
Latest member
PapaD
Top