Search results

  1. C

    Help me solve a cooling issue. Pic's inside.

    the pictures you show are of a serpentine system, my 86 k10 is not a serpentine system. i did not think any thing before about 87 was a serpentine system. anyway my stock non serpentine system is waterpump to heater back to the radiator. if you bypassed your heatercore you probably just hooked...
  2. C

    Help with starting 79 k20 400SBC

    yep, the leak is probably from not torqueing the heads correctly or not resurfacing the heads or needing better headgaskets that thin metal ones. good gaskets for rebuilds are not cheap. probably a waste of time but coolant in the cylinder will make that plug look really clean. a shortcut can be...
  3. C

    '87 Blazer bucket seat foam replacement

    its interesting a few years ago I bought some nice buckskin colored leather seat covers for my 86 fiero on ebay that turned out great. they were so nice I bought a complete front and rear set for my 87 mercedes sdl along with a couple of extra hides for the headrest and front seat backs. you...
  4. C

    '87 Blazer bucket seat foam replacement

    I have not found a upholstery guy that will attempt this job. A local guy found some seats in a dodge van that were very similiar to the blazer seats even the same shade of blue. my 86 k5 has 87 or 88 seats that are still pretty good but showing some wear. I tried to get them covered in blue...
  5. C

    First time "real" painting.

    they make what they call nib files that do just that you can file the nibs down and it saves cutting and buffing time they also work on sags or runs but you gotta be careful as a run or sag can take several days to harden, if you mess with it too soon it can cause a mess.
  6. C

    First time "real" painting.

    ok, ppg primers were non sanding epoxies down first then sanding primer over that then any filler on that. non sanding usually means it will "ball" up under sand paper but you can get by with scotchbrite if you clean it out after a few swipes usually to get some trash out before the sandable...
  7. C

    0411 pcm labels? how to order the correct one without using a vin number?

    does anyone know the correct 0411 pcm for the 2001 or 02 express van with the vortec 5.7 and 4l80e 2500 or 3500? maybe the correct label info on the pcm?
  8. C

    Factory Stand Alone 0411 PCM for 4L80e

    I have a 1991 k2500 suburban with the 4l80e and am following along as I have both a ebl ecu with the programming stuff and also 2 of the 0411 hopefully right ones from a express van with a 5.7 and the 4l80e. I am of course not sure if that is what was really sold me. I was hopeing some one would...
  9. C

    GMC-IH

    thats the way sometimes the shade of a color is different once its applied, It looks great anyway, I remember my 39 chev was I think woodgrained.
  10. C

    GMC-IH

  11. C

    GMC-IH

    ih travellalls and 70s pickups and 800 scouts all had fender tanks, I'm not sure but one of them might fit your application. When the far east embargo happened in the 70s I built two more tanks for my j200 so I could make it to the deerlease and part of the way back so I could get enough fuel to...
  12. C

    GMC-IH

    I dont know how far you have got on the gm steering column but be sure and loctite the three small screws under the turn signal because on three of mine they have come loose, then you get a wobbling steering wheel where it tilts and its a pita to get to them after its together. boy thats a lot...
  13. C

    NP203 transfer case availability and rebuild

    sorry to intrude but this has me wondering what the 'full time' tranny and transfer is labeled in a 79 k5 parts truck I have are. I know its a 400 sbc because thats what I bought it for but it is a auto with what I think was called quadratrac. I thought just by looking at it when I borrowed the...
  14. C

    1985 GMC A/C Harness

    my first thought would be to search ebay. there is one for a camaro and one that seems more complete for a el camino and other body styles there now on a quick glance. either my fit your needs.

Latest posts

Forum statistics

Threads
44,434
Posts
957,802
Members
36,798
Latest member
scrapmetal
Top