Search results

  1. ByrdDog

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    You can put me on the list. Tools, shop, welder, trailer, etc.
  2. ByrdDog

    Looking to buy our first 6.2

    Gas will be much easier to get parts for. I searched around for months trying to find replacement heads for my 6.2 before stumbling across a machine shop that would rebuild the old ones. I was really close to pulling the 6.2 & dropping in a 383 crate motor.
  3. ByrdDog

    Help with rim purchase for lifted 78' K10

    I think you'll be completely fine with a 315 on a 16x8.
  4. ByrdDog

    Towing with my 86.... hints, tips, essentials?

    I've pulled the same 5th wheel with a 7.3 Powerstroke, LML Duramax, and my current 6.0 Powerstroke. Sucked with all of them. If there's any wind besides a tailwind, the camper drags like it weighs twice as much. And in the TX Panhandle, there's about 1 day a month without 20-30mph winds!
  5. ByrdDog

    18x10 front and 18x12 rear who's done this? Look inside.

    I really like the look of the 18's. If they look too small, just run a slightly bigger tire. Would probably improve ride quality anyway.
  6. ByrdDog

    Glow plugs half work

    Mine has a very tough time starting in any temperature close to freezing, even with all the glow plugs working. I think I may be down a few points on compression; maybe the same for you?
  7. ByrdDog

    6.5 turbo swap with a/c

    I'd be interested as well - would love to bolt a turbo on my 6.2
  8. ByrdDog

    6.0 NV4500 K30 swap

    Is the 205 in good shape? Will you be selling? I would love to get rid of the 203 in my K30
  9. ByrdDog

    Tires for Stock Rims '79 K20

    Not saying you should do it, but I run 315/75's on my K30 and my 60 F250 on stock steel wheels. I off road the K30 & have never blown a bead, although I don't air down.
  10. ByrdDog

    12v Swap Into 87 C30

    What are you doing for a transfer case?
  11. ByrdDog

    Vintage air vs. stock dilemma???

    I'm interested in this as well. My C30 was a factory air truck, but it hasn't worked in 30+ years; My K30 is a bare bones, non-AC unit. There is a guy in town with 2 late 70's squares, both full custom jobs, & both have the Vintage Air systems. This is the way I plan to go for both of mine...
  12. ByrdDog

    Hi, from west Texas.

    All right, another one in the TX Panhandle! I too am working on a 79 C30. Among other things...
  13. ByrdDog

    Banks Sidewinder Turbo

    I'd be interested as well, if these other guys don't get it first.
  14. ByrdDog

    About to get my first cummins truck.

    I'd install a fuel pressure gauge. The VP44 can still function on very low pressure, so you want to know if your lift pump is failing. I installed a Raptor pump in place of the stock one & was very happy with it.
  15. ByrdDog

    86 C20 4" lift? Options?

    I just put the HD coils in the front of my C30 & it now sits about 5" higher in the front. Still can't decide of I want to stay with these or go to a standard set for just a factory ride height. The HD's are 35% stiffer than stock, & as it sits now, the shocks are all the way out. If you...
  16. ByrdDog

    Just want to make shure im reinstalling new control arms correctly.

    May have to take the motor mounts loose & jack up the motor for clearance
  17. ByrdDog

    Passenger turn signals inoperative

    Update - tested the wires at the turn signal connector under the column & get a flash in my test light on both turn signal wires, and the right front signal started working, but the rear & indicator are still dead. Anyone.......? Can someone post a wiring diagram for the brake/turn circuits...
  18. ByrdDog

    Passenger turn signals inoperative

    Both passenger side turn signals, as well as indicator not working. Checked bulbs & grounds & everything is good. Passenger side brake light doesn't work either. To me, this seems like a problem with the switch itself. Anything anyone else can think of to check before I tear into the...
  19. ByrdDog

    Want to build a good horsepower, good fuel economy engine for a 1978 c20 with stock 350. I don't know much and need help.

    Do you know your motor is in good shape to start with? Tearing the engine completely apart to replace pistons is MUCH more complicated & expensive than just pulling heads.
  20. ByrdDog

    Want to build a good horsepower, good fuel economy engine for a 1978 c20 with stock 350. I don't know much and need help.

    RPM range will vary a little depending on what rear gear ratio your axle has, but being a C20, I'd suspect 3.55 or 3.73. Regular highway driving with either of these gears would probably put you at 2200-2500 RPM's. Most daily drivers live in this range, so if that's the case for you, that's...
  21. ByrdDog

    New For Me 1985 Silverado 20 6.2 Diesel

    If you're referring to the ~1" lines coming out of either side of the center of the intake, that's the CDR (can't remember what it stands for). It's a crank case vent system to pull a slight vacuum on the crank case. You don't want to run without it, or you risk blowing out seals. On my 6.0...
  22. ByrdDog

    no electrical power

    I'd take a pass on painless wiring. I used one of their universal kits to re-wire my 60 F250 and you can tell they cheaped out on a lot of stuff. My brother-in-law did his 72 K5 with American Autowire & that kit is miles above painless. This is one area I would not go cheap on. Running down...
  23. ByrdDog

    New For Me 1985 Silverado 20 6.2 Diesel

    I like mine too, but I'm biased, because mine is currently running. If my IP ever takes a dump, it would be hard to justify the cost of a new one just to make 175hp. Good parts are getting expensive & hard to find for the 6.2.
  24. ByrdDog

    Rebuilding Front Suspension

    Was able to find all Moog parts on RockAuto. Got everything torn out & new control arms installed. Will be fitting new springs & re-installing the spindles next. Fortunately, the bearings looked to still be in good shape (replacing them anyway, since I'd already ordered the parts), so no...
  25. ByrdDog

    Chevy C10 "Build"

    Sometimes Roadkill dumps insane money into the junkers they build.

Latest posts

Forum statistics

Threads
45,372
Posts
981,806
Members
38,394
Latest member
sgt_couture
Top