Search results

  1. fussfeld

    No CRANK after rain......

    But if the starter was bad, wouldn't you still hear a click from the solenoid?
  2. fussfeld

    No CRANK after rain......

    i've included the diagnostic sheet from the repair manual as guidance:
  3. fussfeld

    No CRANK after rain......

    No it's ok----i AM a dumb ass as you'll see in a minute: HOLIDAY UPDATE: Since i'm on long holiday weekend, i can get whole-hog into it. 1) First i want to clarify about the distributor. Donald suggested something about the distributor. But since this is a crank problem, not a start or run...
  4. fussfeld

    No CRANK after rain......

    Thanks everyone for responding. i did get it started. i will update ASAP. It's maybe not what i thought.....
  5. fussfeld

    No CRANK after rain......

    No CRANK. It will start after everything dries up. So, i don't think it's the distributor.
  6. fussfeld

    No CRANK after rain......

    No Crank after rain Battery good. Lights good etc. It WILL start after everything dries up. Just the standard 70's-80's set up with HEI. Any ideas?
  7. fussfeld

    Zinc, Engine oil and flat cams

    i should add that they were stock-ish 305's and 350's. So, is higher ZDDP even needed with those engines? Stock cams, stock valve spring pressures.....
  8. fussfeld

    Zinc, Engine oil and flat cams

    double post
  9. fussfeld

    Zinc, Engine oil and flat cams

    Here are my thoughts. And i'm NOT saying high ZDDP levels are even needed with stock/stock cam valve springs? Who knows? But to be safe, here's what i did: (Note: All my RUNNING cars have roller lifters, so now i just use Mobil 1 synthetic. Yes, i've joined the 21st century. You should...
  10. fussfeld

    Need a direct fit radiator, no mods to make fit 87 GMC V2500 5.7, 350 Auto trans

    i got a champion as well. Don't have the part # off hand, but it's the standard 2-row. No, it did not exactly fit the mounts as you can see: Since the radiator is locked in position and not moving i'm not messing with it for now. Other than the mount issue, the radiator has been just great.
  11. fussfeld

    SAE or synthetic

    i "heard" that if you have stock-ish valve springs AND still running flat lifters, then you don't "need" any zddp additives. Just to be safe though, when i had the 350 and 305 (both with flat lifters and stock cams etc.) i used: https://www.redlineoil.com/10w30-motor-oil They put 1200 ppm...
  12. fussfeld

    Cranks good, no start / hard start engine cold or warm:

    i'm sorry to write a book about this, but i feel this is the only way we'll solve it. Background: quadrajet HEI ignition Stock-ish cam---like 184/195 @ .50"---- so decent vacuum etc. 1) Prior to the no start/difficult to start problem, the engine would start cold within 1 crankshaft revolution...
  13. fussfeld

    No start/hard start cold or hot:

    i'm sorry to write a book about this, but i feel this is the only way we'll solve it. Background: quadrajet HEI ignition Stock-ish cam---like 184/195 @ .50"---- so decent vacuum etc. 1) Prior to the no start/difficult to start problem, the engine would start cold within 1 crankshaft revolution...
  14. fussfeld

    Any good hacks/upgrades you've come up with for our trucks

    P.S. These brands look to have the identical starter as the delco, which leads me to believe that they are all made in the same factory in China, and they'll just put different stickers on depending on which brand it's going to be? Yes, the Delco is M.I.C. as i just checked....:( Proform #...
  15. fussfeld

    Any good hacks/upgrades you've come up with for our trucks

    The starter is AC Delco part # 3371002. which cross references to a 1999 c-1500 pickup, but i assume Suburban, Tahoe, vans also use the same part#? Also, i "heard" that the even later Astro starters have even more torque----cos remember, the 4.3 v-6 was equipped in vans all the way up to...
  16. fussfeld

    Any good hacks/upgrades you've come up with for our trucks

    $147 including bolts, + profuse amount of cussing while removing the old one. However, no cussing when installing the new one----easy to install.
  17. fussfeld

    Any good hacks/upgrades you've come up with for our trucks

    i recently, likely, roasted my starter----see my upcoming posts as to why. So, i figured now would be a good time to try the mini-starter: i found a part # that would work: AC Delco part # 3371002. Much smaller/lighter than the original style starters. More torque due to the gear...
  18. fussfeld

    Narrowed control arms

    http://michiganmetalworks.com/store/index.php?route=product/product&product_id=120http://michiganmetalworks.com/store/index.php?route=product/product&product_id=120 They say narrow, but i can't find by how much. Might have to call em.
  19. fussfeld

    Narrowed control arms

    4) pretty sure there are other companies with shortened arms, but don't got no time to look right now......
  20. fussfeld

    Narrowed control arms

    1) i think this company has them: http://www.fatmanfab.com/ About 1.5" narrower? You'll have to search around in there or call them because i don't have time to provide direct links. 2) He's lengthening rather than shortening, but the concept is the same. 3) i wondering if S-10/G body arms...
  21. fussfeld

    Hotter outdoors temps cause her to buck and cut out.

    Are you injected?
  22. fussfeld

    What non 73/87 parts have you swapped into your squarebody?

    Astro(safari) aluminum wheels. i upgraded to michelins and didn't want to run steel rims anymore. This is a fairly cheap way at the salvage yard to get into aluminum rims. 85-2002 was 5X5 lug 2003 on up was 6 lug and i think 16" rims.
  23. fussfeld

    Hotter outdoors temps cause her to buck and cut out.

    Can you put up a pic?
  24. fussfeld

    Vapor Lock issue?

    i think you can do this (may have to switch to a 2 port pump though). But again, we'll have to wait until the weekend until i can really get into this.....if at all. Just too busy. i think the stock steel factory line behind the alternator and in front of the engine works ok at keeping the...
  25. fussfeld

    Hotter outdoors temps cause her to buck and cut out.

    What type of fuel pump you got? The first question i would ask is that, is there a return line in the system? Being that it's a 77, there may not be. But, if not, they are fairly straightforward to put in.

Latest posts

Forum statistics

Threads
44,162
Posts
950,643
Members
36,276
Latest member
2manysquares2care
Top