Search results

  1. Terry Wilkerson

    Door panel gap between panel and carpet.

    So I changer interior color from red to black. I had a slight gap between the bottom of the door panel and the top of the door carpet. I'm talking 1/16 in. You could see a red line in the middle between the two pieces. It thought it looked bad. I used a piece of black electrical tape and put it...
  2. Terry Wilkerson

    Lurker saying hi

    Welcome from KC.
  3. Terry Wilkerson

    Hello from Jackson county Georgia

    Welcome to the group. You'll find a lot of useful square body info on this forum.
  4. Terry Wilkerson

    Hello All

    Welcome from the flatland KC.
  5. Terry Wilkerson

    LMC truck has the wrong window regulator rollers....

    I ran into the same problem with lmc rollers. I cut the old roller stud off and punched out the stud. Then cleaned the area up and welded the hole shut. Drilled a correct size hole and installed the lmc rollers. I know all don't have a welder but maybe a buddy has one. Oh yes and if you do this...
  6. Terry Wilkerson

    Window seals, new, tight fit.

    Installed the new window motor and lubed everything up. Work good now. Thanks to all for your advice.
  7. Terry Wilkerson

    Window seals, new, tight fit.

    Is the motor indexed to the half moon drive gear or does it run to the stops in both directions?
  8. Terry Wilkerson

    Window seals, new, tight fit.

    The driver side motor works good. There was indication it had been replaced sometime. On my way to lmc now. They are 4 miles from home. Picking up a new motor for passenger side.
  9. Terry Wilkerson

    Window seals, new, tight fit.

    Worth a try. Thanks
  10. Terry Wilkerson

    Window seals, new, tight fit.

    Just installed new window seals. Have electric windows. It's all the motor can do to go up and down. Has anyone used graphite powder on the felt channel with success?
  11. Terry Wilkerson

    Is this the electric window relay?

    What R Carnella said.
  12. Terry Wilkerson

    Power door locks

    I did find both door lock wires broke in the door boot. Also found one of the window motor wires with cracked insulation. I cut the kick panel out to get access for the new wires. I pulled the three wires back out of the door and the kick panel. Made a short three wire harness. I pulled it into...
  13. Terry Wilkerson

    New to the Forum

    Welcome. Very good looking truck! You have brought it a long way.
  14. Terry Wilkerson

    Mystery Coolant leak

    I think it can be done but someone with more experience than I will have to tell you how. Getting old one out might be harder than installing the new one.
  15. Terry Wilkerson

    Mystery Coolant leak

    If no coolant on top of the engine you might have a freeze plug leaking.
  16. Terry Wilkerson

    Power door locks

    Sounds like a plan. More to come.
  17. Terry Wilkerson

    Hello from Arizona

    Welcome. Cool that your restoring your grandfather's truck.
  18. Terry Wilkerson

    Power door locks

    I bought a lock solenoid off an 87 corvette, same solenoid. Bench tested it and it works. Just had to swap the mounting brackets out. $6.00 No power to the driver side lock solenoid. I did use a meter to verify this. Relay clicks and both switches operate the passenger side lock. That makes me...
  19. Terry Wilkerson

    Power door locks

    I need to verify with someone what I'm thinking about my power door locks. The passenger side lock works using either door switch. The driver side does not work using either door switch. I did find and print a wiring diagram for the system. I'm trying to eliminate having to pull the relay out...
  20. Terry Wilkerson

    Door lock relay whereabouts.

    upper left corner of pic.
  21. Terry Wilkerson

    Door lock relay whereabouts.

    So is the white connection the door lock relay from the bottom?
  22. Terry Wilkerson

    Door lock relay

    I found a wiring diagram of the door lock. I answered my own question.
  23. Terry Wilkerson

    Door lock relay

    Does each door lock have its own relay or are the both operated by one relay. Passenger side on my truck works driver side doesn't.
  24. Terry Wilkerson

    1983 K5

    I love the color combo and the safari looking top. Nice truck.
  25. Terry Wilkerson

    Vent Window Question

    Yes there is a screw in that hole. I took it out for a measurement. I think it is in the lower wing window frame.

Latest posts

Forum statistics

Threads
45,466
Posts
983,996
Members
38,517
Latest member
bglendon
Top