Search results

  1. Raybob9289

    6.0 NV4500 K30 swap

    The ICT mounts put the Trans/ Tcase where I wouldn't have to drill anymore holes in frame. It all just worked out better. I measured the Center line of the old transmission output shaft height and duplicated my setup.
  2. Raybob9289

    6.0 NV4500 K30 swap

    Built a NV4500 Mount and NP208 is installed. I ended up having to use the ICT motor mounts. So the back of 6 liter is exactly where the back of the 454 was.
  3. Raybob9289

    6.0 NV4500 K30 swap

    I ended up using the 2001 Suburban 2500 Hi-pressure hose. Fits great at the pump.. Then I cut off the metric end that goes into the Hydroboost unit. Re-flared it to a 45° flare and boom done.
  4. Raybob9289

    2000s hydroboost into a square

    Did you use the original high pressure hose??
  5. Raybob9289

    6.0 NV4500 K30 swap

    Which pressure hose are you LS swap guys using on the Hydroboost. My original (1977) is about due and It don't seam to fit back behind the pump. Any advise is welcome
  6. Raybob9289

    6.0 swap with Hydroboost

    Which pressure hose are you LS swap guys using on the Hydroboost. My original (1977) is about due and It don't seam to fit back behind the pump. Any advise is welcome...
  7. Raybob9289

    1977 two tone trim paint color

    I think I've posted this before and if there is a thread onthis topic please except my apologies. I am looking for the yellow color that GM used in the 77 only two tone trim. Anybody?? Bueller??
  8. Raybob9289

    6.0 NV4500 K30 swap

    Lunch Debreifing; I went back to the adjustable engine mounts. Moved the engine 2" forward. NV4500 shifter is now easily out of the way of the T-case shifter assembly. Tranny Mount is also almost exactly over the factory crossmember. Now I gotta figure out an elevation. See pic. Transfer case is...
  9. Raybob9289

    6.0 NV4500 K30 swap

    The 454 clutch fan?? I'm using the screw on clutch fan from the 6.0 out of the the Burb
  10. Raybob9289

    6.0 NV4500 K30 swap

    I'm only worried about the NV4500 shifter position and making sure the stock 6.0 fan fits in the original 4 core fan shroud. I'm considering adjustable engine mounts and sliding the engine forward about 1-1/2" to 2" ??
  11. Raybob9289

    6.0 NV4500 K30 swap

    it's really close only on passenger side cylinder head
  12. Raybob9289

    6.0 NV4500 K30 swap

    Several test fits. Went with the ICT mounts but it seams like the engine is really close to the fire wall? Has anybody else done this LQ4 NV4500 swap? I guess I'll mock up the tranny to see where it's gonna land...
  13. Raybob9289

    6.0 NV4500 K30 swap

    454 Engine, SM465 trans and NP205 are out & sold.. Im fully committed now
  14. Raybob9289

    6.0 NV4500 K30 swap

    Picked up a working NP208 out of a 85 Silverado K20. $100 also got the Whole shifter, bezel & wiring to light up on the dash. I just need to have my brother do a rebuild and change out the 27 spline for a 32 spline.
  15. Raybob9289

    6.0 NV4500 K30 swap

  16. Raybob9289

    6.0 NV4500 K30 swap

    Adaptation of the 205 to the NV4500 is a shitshow. Way to much $$ and brain damage. This old K30 squarebody is my Home Depot weekend cruiser. I don't think I'll ever beat on a 208 or 241 enough to break it. And I've found 208 & 241's with pass side drops and already 32 spline inputs for between...
  17. Raybob9289

    6.0 NV4500 K30 swap

    205 works but leaks. I'm in Littleton, Colorado. I'll let you know when it out. You can come get it
  18. Raybob9289

    6.0 NV4500 K30 swap

    Last summer was the put it on the correct frame and this winter its 6.0/ NV4500 swap on my 77 Cheyenne K30 dually. I can't stand the 454 and SM465, can't get the truck out of the way of traffic. BTW 104K mile 454 carb to pan for sale cheap. I picked up a 90k mile 6.0 out of a 01 2500 suburban...
  19. Raybob9289

    Dual Tank Switch Dilema

    With the correct ****** switch it works perfect..
  20. Raybob9289

    Dual Tank Switch Dilema

    I still owe you a sixer
  21. Raybob9289

    Dual Tank Switch Dilema

    Thanks for your help Dude, I guess I'll be using the Pollak switch.
  22. Raybob9289

    Dual Tank Switch Dilema

    Here's your reminder to check your notes
  23. Raybob9289

    Dual Tank Switch Dilema

    That would be Awesome..
  24. Raybob9289

    Dual Tank Switch Dilema

    Thanks Dude,,
  25. Raybob9289

    Dual Tank Switch Dilema

    Thanks for your help, but I'm just a Frame Carpenter. Wiring hurts my brain. are you talkin about the original GM dash switch???

Latest posts

Forum statistics

Threads
45,454
Posts
983,795
Members
38,502
Latest member
GorillaHumper
Top