Search results

  1. P

    Motor Dies While Driving

    i couldn't believe this post when i read it because my fresh frame on resto on my '81 c 10 360/th350 is doing the exact thing!it feels like it is running out of gas and will limp along at just off idle but will not take throttle. any input is welcome. sorry to barge in on this post but i could...
  2. P

    Can someone point me to threads on 350 vs 400 cid

    400 is my choice. as previously stated, plenty of torque as is.
  3. P

    305-400 SBC swap - Radiator Question

    treat it as a big block and put a 4 row rad in. why skimp on such an important part?
  4. P

    What is everyone's go to for converting rusty frames nice looking frames

    whatever product you decide on make sure you wear a tyvec suit and disposable gloves. i will tell you that when you are laying on the floor painting upside down the product will run right down your arm. use tape where the sleeve meets the glove. also tarp your garage floor unless you don't care...
  5. P

    50W in a 454?

    one other thing comes to mind, maybe the engine is a user and the 50w is in there to slow down the consumption.
  6. P

    50W in a 454?

    i run the rotella 15-40 per my engine builders recomendation and add zddp for the flat tappet cam. 50w seems a little thick especially for cold start up
  7. P

    What is everyone's go to for converting rusty frames nice looking frames

    Eastwood rust encapsulater works well. spray lays down better than brush but you are not building a show truck and with a lot of time and patience you will end up with a nice job.
  8. P

    Roller rockers,poly locks and valve covers

    just what is the advantage of the rollers?
  9. P

    US General Tool Carts, Tool Chests, Tool Cabinets

    i have a craftsman stack and a US General 42" rolling drawer cabinet. the harbor freight has a nice quality feel to it. Car Craft magazine tested tool boxes about 3 years ago and gave US General high marks. why spend more unless you make your living out of the box or you have some phobia that...
  10. P

    Fleetside or stepside

    i wouldn't have anything but a short step. makes it look like an old timer (like me)
  11. P

    400 SBC vs 454 BBC

    i disagree with GMFORLIFE. consider a 400 a big block due to displacement and put a big block radiator on it and no worries. don't ask it to do more than it was designed to do and it will last forever. been driving 400's since 1971 and have never had an issue and have never heard of one that...
  12. P

    400 SBC vs 454 BBC

    my 406 cost me $1800 for a professional rebuild. runs like a top. no issues at all. it all depends on your wallet.
  13. P

    Truck part vendors

    LMC has what you need. i have used them for years with no issues
  14. P

    LMC floor panels

    they are replacement pans of the same gauge as original. butt weld or flange and fit over the lip. i have used their replacement parts several times with no issues. expect to do some fabrication here and there
  15. P

    Cowl/Firewall/Floorboard rust

    maybe buy a better welder. is this your first build? through the years i always relied on someone to weld after i had done the tedious work of cutting and fitting the new metal in. then about 10 years ago i bought a miller 140 auto set, great move. easy to learn mig and you don't have to rely or...
  16. P

    Gas Tank Removal

    i'm with MikeB, i don't know how you can do it correctly without removing the bed.
  17. P

    How to clean gas tanks

    cleaned and painted my tank on my '81 c10 short step. about a month after filling and starting it the tank started leaking. a little over $100 @ LMC truck. probably less from rock auto. money well spent!
  18. P

    Firewall cleanup & paint prep, any tips?

    dont forget to reseal the wiper well if you want to have your firewall redo last. there is only a swipe of seam sealer and paint preventing water from getting to that spot welded seam. i use 2 coats of bed liner in that area when i re do them.
  19. P

    76 k5 suspension and brake upgrade

    how are the cab mounts? if they are cracked and squishy that could affect the overall feel of the ride.
  20. P

    Floorboard Thickness

    my experience says 18ga i have never seen or heard of 19ga. but that's just me. would be cheaper to buy a hood from the local salvage yard than buy new metal from a retailer. laying fiberglass over a metal floor pan does not seem like a long term solution. there is a certain amount of pride that...
  21. P

    Header Flange Not True

    before i would worry about the warp, i would check to see if they will actually fit your truck.
  22. P

    Which 350 setup would you buy to replace your 305?

    no ls for me. on your budget you can buy the base 350 crate, swap the cam,put vortec heads and intake, a carb of your choice and make 350 hp +/- and 350+ torque. check out roadkill garage on youtube as friedburg has done this build and has all of the numbers for you and all of the prices. screw...
  23. P

    Engine Choices

    what are the actual dollar numbers that you have in mind? i have found that it usually takes $5k to $8K to get a barn find right without paint. that is with no return on my hours. if this is a flip you will probably be working for $2 bucks an hour. i just don't think the market is there for...
  24. P

    Planning summer small block build

    there is no external balancing required, but you must use a balancer and flex plate for a 400.
  25. P

    Planning summer small block build

    save your $ on the roller rockers, you will never turn enough rpms to take advantage of them. i have used northern auto parts performance engine kits 3 times, twice on 400's with good results. $472. also keep the stock rods if it is a daily.you will get your choice of cams and flat top...

Latest posts

Forum statistics

Threads
45,456
Posts
983,836
Members
38,503
Latest member
seanhatesregister
Top