Search results

  1. K5 Blazer

    NP241-C, non VSS. Can I convert to VSS or no. No luck!!

    I am using the holley terminator max. I don't think there is any provision to control the VSS signal.
  2. K5 Blazer

    K5 K10 17x8 or 17x9 vision Cheyenne Aluminum rally wheels?

    If you get them please share some photos, I really like the stock rally rim look but wanted to run Wilwood brakes on all four wheels. Large rims then the stock 15s would make that possible.
  3. K5 Blazer

    K5 Blazer Shift Indicator

    I had not issues programming it. Did it once and has worked perfect so far.
  4. K5 Blazer

    NP241-C, non VSS. Can I convert to VSS or no. No luck!!

    There are passenger side NP241 with a VSS out there but very pricey. There are a few on Ebay and www.transfercasesolutions.com, have some in stock.
  5. K5 Blazer

    K5 Blazer Shift Indicator

    I ended up installing Dakota Digital GSS-3000 Universal Sender Unit for Gear Shift Position Indicator. The column gear selector would have never lined up correctly and I felt it would be problematic over time. The Dakota Digital set-up works well. Unfortunately, this should be part of the Dakota...
  6. K5 Blazer

    241c or stay with the np203

    I felt there were to many variables to get the stock gear skeleton to I felt there were too many variables to get the stock gear selector to work properly so I am going to install Dakota Digital GSS-3000 Universal Sender Unit for Gear Shift Position Indicator. The gear position will be seen on...
  7. K5 Blazer

    NP241-C, non VSS. Can I convert to VSS or no. No luck!!

    I did install the Walter Engineering VSS on a NP208. I found Walter Engineering VSS problematic. First the signal was very weak and would only start working after I was going 20mph+. I needed to get the speed sensor closer to the reluctor wheel, so I sanded done the speed sensor holder to get it...
  8. K5 Blazer

    K5 Blazer Shift Indicator

    Yes, I have a total of 7 shift points on my column. I can shift into every gear with the column. I switched out the gear selector indicator from a 3 speed to a 4 speed but can't get the all the shift points to line up correctly.
  9. K5 Blazer

    241c or stay with the np203

    I did an LS and 4L60e swap on my 4x4 K5 Blazer. I use a Holly terminator ECU. TC was a NP203 and I changed it out for a NP208. The NP208 and 4L60E is a nice option but creates problems as well. First I needed to install a VSS. I did install the Walter Engineering. I found Walter Engineering VSS...
  10. K5 Blazer

    K5 Blazer Shift Indicator

    I have a 1973 K5 blazer, with a LS swap with a 4L60E transmission. I have Dakota Digital gauge cluster. I tried installing a 4 speed shift indicator and I cannot get the shift indicator to line up properly. I have made several attempts to adjust the cable so the shift indicator works but can't...
  11. K5 Blazer

    Need 1973 - 1975 Windshield to Hardtop Brackets

    Decided to make my owner brackets out of 5" x 3" x 3/16 aluminum stock. Then glued 1/16 rubber sheeting to the inside of the bracket to protect the paint on the windshield side of the vehicle. Came out nice and the stock was relatively cheap, less than $20.
  12. K5 Blazer

    Need 1973 - 1975 Windshield to Hardtop Brackets

    I am hoping that I can find a set. Someone contacted me on here and they said they had a set. It ended up being a scam. It's a bummer because I have done several transactions via forums such as this, and now my trust has been ruined. Such a bummer.
  13. K5 Blazer

    Gear Ratio

    I live in the San Francisco Bay Area, everything is very expensive here. That was not the highest estimate I received. One quoted was $2500 per axle. As part of that estimate, I was told the drive axles in the rear end were bad and needed to be replaced as well. This also includes an Eaton...
  14. K5 Blazer

    1973 - 1975 Windshield to Hardtop Brackets

    I am looking for 1973 - 1975 windshield to hardtop brackets. I know there is a set of these brackets sitting out there. I am hoping that someone will sell them to me. Thanks!
  15. K5 Blazer

    Lift options and recommendations for a 1980 Jimmy

    Thanks for the info, my Blazer sits lower in the rear after a 4" lift. I would like to level it out or have slight rake in the front.
  16. K5 Blazer

    1987 Chevy seat belt warning buzzer

    I wish all fixes were that easy, I prefer to disable my seat belt alarms. I am assuming the previous owner felt the same way.
  17. K5 Blazer

    K5 Blazer values… possibly buying 86 k5

    Looks solid, getting rid of the running boards and putting a nice set of wheels on her would make a world of difference.
  18. K5 Blazer

    Gear Ratio

    We did the calculations on it 4L60E transmission with 33" tires. My options were 4.10 or 4.56. 4.10 would have been a little better for the freeway driving. I figured this vehicle is more around town driving and I wanted to have the torque when I put my foot into it. Cruising speed at 70mph...
  19. K5 Blazer

    Old Bedliners

    Include some photos when you pull it out. Curious to see how it looks?
  20. K5 Blazer

    Gas to diesel

    Seems like a lot of great information so far.
  21. K5 Blazer

    What did we do before cup holders?

    I like the floor cup holder so my lady can still sit next to me. The only advantage of a bench sit.
  22. K5 Blazer

    Old man constantly asked to drop his truck.Any stock height C10s left in the world??

    I think it would be a cleaner look without the bedrails, especially if you lower it.
  23. K5 Blazer

    Old Bedliners

    It looks in good shape but never can tell unless you pull it out. It does not look like it would be that hard to pull out. The bed liners that wrap underneath the top rail of the bed are more difficult to pull out.
  24. K5 Blazer

    Show your daily driver

    I want my 1973 K5 blazer to be a daily driver. I am having new gears put in it so it's more drivable. The 3.07 ratio were way too tall after installing a 4L60e. Hopefully using a kill switch will keep anyone from stealing it.
  25. K5 Blazer

    Full removable top conversion

    There are several videos on youtube of people doing a full removable top conversion.

Latest posts

Forum statistics

Threads
44,756
Posts
967,426
Members
37,482
Latest member
Okla homie boy
Top