Search results

  1. kleedus

    2 wheel drive s10 blazer

    got the headers and the radiator today got the headers loosely bolted on to test the fit they fit pretty good but I will need to adjust a few things. radiator looks good but I have to go to work tonight so I can't play with it till days off.
  2. kleedus

    2 wheel drive s10 blazer

    the only thing easier would be a 3.8 v6 in a vega direct bolt in using all stock gm parts. but that's kinda why I held out for a 89 up blazer with the 4.3 I have had a couple chances to get a 2.8 blazer and passed on them
  3. kleedus

    1978 c10 rear flip kit question

    here is the truck after I did it
  4. kleedus

    1978 c10 rear flip kit question

    I used the second pic on my 85 I had to cut a hole in my stock u bolt plate for the center pin if I was to do it again I would buy some perches and weld them on
  5. kleedus

    2 wheel drive s10 blazer

    and the nuts are factory welded to the raised mount these mounts are the same height as the 4.3 mounts were so my engine sits in the same place just a bit longer on the front
  6. kleedus

    2 wheel drive s10 blazer

    its stabbed in
  7. kleedus

    2 wheel drive s10 blazer

    I got off easy the blazers have a raised pad the motor mount bolts to easy removal
  8. kleedus

    2 wheel drive s10 blazer

    I used the transdapt mounts that use the 2.8 motor mount http://www.tdperformance.com/images/ePIM/original/9906-9926.pdf do not use any mounts that use the 4.3 mount they are week both my original 4.3 mounts were bad when I pulled it out
  9. kleedus

    80 clip swap on 86

    that's 81 up if he was putting a 81 up clip on a 80 older truck he would need to cut a hole for the hinges. but putting the older clip on a newer cab no need to cut for clearance
  10. kleedus

    80 clip swap on 86

    oh ya the frame horn where the bumper bolts on is different I have just cut the frame horns off in front of the core support mount and swapped them just weld them back on. not sure about any other ways to swap bumpers
  11. kleedus

    80 clip swap on 86

    they bolt on the inside of the fender on the 80 and older trucks they should stay on the fender when you swap it
  12. kleedus

    Newbie Transfer Case Identification Help

    this is a fixed yoke 205 it is stronger
  13. kleedus

    Newbie Transfer Case Identification Help

    I have a slip yoke tail shaft housing for a 205 I took it off and put a fixed yoke on that's what I recommend you do but if you end up needing a tail shaft housing I have one
  14. kleedus

    2 wheel drive s10 blazer

    I will have the 15 inch wheels on it for sale when the new wheels get here they are off a 95 blazer one has a little road rash on the outer lip not bad and I only have 3 of the center caps can't find the fourth front tires are about half tread rears a 3/4 tread 200 bucks plus...
  15. kleedus

    2 wheel drive s10 blazer

    ouch I just dropped a grand for the zq8 wheels and a set of 4 245/50x16 kumo tires same size tires that are on this truck I plan to get 2'' drop spindles and 3'' blocks for the rear to lower my blazer and the 350 should lower it a bit as well
  16. kleedus

    80 clip swap on 86

    ya core support both fenders and hood you will need to remove the cowl panel from the newer truck the older truck hood covers that area basically all the sheet metal in front of the doors needs changed
  17. kleedus

    80 clip swap on 86

    take the parts off use the body mounts to match the year of the frame. then put the parts back on pretty easy swap going to the older clip
  18. kleedus

    got a square body!!!!!!!! s10

    you can find just about anything on ebay http://www.ebay.com/itm/1983-94-Chevrolet-S-10-Blazer-GMC-S-15-Jimmy-Lund-19010-Moon-Visor-Chevy-/251667581775?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a988e8b4f&vxp=mtr
  19. kleedus

    2 wheel drive s10 blazer

    got the 4.3 out today and got the frame and stuff all pressure washed and got the 350 cleaned up ready for paint found out when I got the tranny out it is a k case gm replacement tranny so good news for me I was worried the 4.3 tranny would not hold up to the 350
  20. kleedus

    got a square body!!!!!!!! s10

    I did the cable back up on the pass door I figured some one would be less likely to look on the pass side for a back up.
  21. kleedus

    2 wheel drive s10 blazer

    ya I am shopping around for the wheels I have seen them cheaper before. just got to be in the right place at the right time the radiator is a great price I am just not sure how the quality will be but for that price its worth finding out
  22. kleedus

    got a square body!!!!!!!! s10

    I put remote door poppers on a 85 chevy c10 I put a back up cable to pull the latch on it just incase. I ran it to the mirror it was hid under the trim piece. all I had to do was remove the screw that held the trim on. then pull the ring on the end of the cable and the door opened. with...
  23. kleedus

    got a square body!!!!!!!! s10

    I posted links in my blazer thread its not to spendy to do if you shop around
  24. kleedus

    2 wheel drive s10 blazer

    these are the headers I got http://www.ebay.com/itm/Hedman-69520-Painted-Exhaust-Header-Tube-Size-1-5-Coll-2-5-SBC-262-400-/161195048639?pt=Motors_Car_Truck_Parts_Accessories&hash=item2587f93ebf&vxp=mtr radiator and fans...
  25. kleedus

    2 wheel drive s10 blazer

    they are little plastic clips that run in the channel http://www.summitracing.com/parts/rnb-45330/applications/ that's my 79 Z28 I also have a 73 Z28

Latest posts

Forum statistics

Threads
44,617
Posts
962,631
Members
37,158
Latest member
thom9719
Top