Search results

  1. D

    What have you done to your square lately??

    Been down the neck fusion road back in 2017 don’t wish that on my worst enemies, glad you’re back at it don’t let it slow you down , looks like you have plenty to keep you busy good luck
  2. D

    What have you done to your square lately??

    I just put a top cover kit and a new reverse light switch in my SM 465 and replaced the shift forks for L-1 and 2-3 hopefully will get the slack out of the shifter , thanks to a video from U tube on the install of the top cover without that would have still been outside trying to figure it out...
  3. D

    Fuel Hose OK ?

    The hard line exists for a reason, just as everyone else said do the work to do it right, after you know it’s done right and piece of mind is worth it in the end, like they say Do It, good luck on your project
  4. D

    Vinyl Floor Recommendations?

    I got mine from OC Carpet, it was pre molded it laid down fairly well, mine was for a 75 C10 high hump and put the kil-mat type under before adding the jute padding seems to be holding up pretty good, it covers the entire cab to the ledge behind the seat, good luck
  5. D

    SM 465 pto cover plate

    By mail will work, I just need one please put your return address when you send it so I can pay you whatever you think it’s worth and postage and Thank You address is Finley 17256 Kayla Dr. Ponchatoula, La. 70454
  6. D

    SM 465 pto cover plate

    I’m following up to see if you may have found the cover plate Thank You
  7. D

    Must Replace Battery Tray 87 V10

    That is a great idea for a few tools maybe a bottle of power steering or a quart of oil, I might look into into it Thanks
  8. D

    Must Replace Battery Tray 87 V10

    I got mine from AMD good price fair fast shipping, good luck
  9. D

    Was someone here selling these 6x9 brackets? Pic inside

    I bought the cab corner speakers for my 75 C10 but they were for 6 1/2” speakers from $bay and they were about 50-60 bucks a little over a year ago good luck on your project
  10. D

    SM 465 pto cover plate

    Thank you
  11. D

    SM 465 pto cover plate

    Thank You was trying to avoid if possible, I have the other side cover for a template if needed, I remember over the years of working on over the road trucks when we would install a pto for a customer I usually threw the cover plate away, wish I would’ve kept one. Take care
  12. D

    SM 465 pto cover plate

    Good afternoon, I’m looking for a replacement cover plate, don’t know how but I think it was thrown away by accident, I replaced the two shift forks and put a top cover kit in my transmission, I’ve tried buying from transmission distributors but are unavailable Novak wants a king’s ransom for...
  13. D

    Flywheel and Pressure plate bolts

    I personally prefer the bronze bushings over the needle bearing hands down, and if the motor is out go ahead and replace the shift fork, dust boot and the throw out bearing for no more than it costs, you will know that it’s right going back with new clutch and motor just my 2 cents
  14. D

    Vent window trick?

    I used the 2 piece vent window seals, I borrowed a mini rivet setting press tool from a friend, use plenty of lube non-petroleum based and take your time, it’s very doable just a little patience and you can do it. Good luck
  15. D

    New Member in S. Utah

    Welcome from south Louisiana I would love to have a flatbed for my 75 C10 I wish you luck, very good group of people and have learned alot from just reading and searching on different forums Happy Holidays
  16. D

    Aftermarket Turn Signal wiring?

    My question is why didn’t you go back with the factory set up, I think you’d be better off in the long run IMHO
  17. D

    Mirror and Vent Windows

    Yes, they are a pain but doable, I got the two piece set for each side and everything else needed to rebuild from lmc and one of the window frame was broken on pass side take your time, be patient and you’ll be able to do it FWIW
  18. D

    Square body calendar

    I used to get one every year from a Napa dealer we dealt with it had the old farm tractors, but haven’t seen them for 4 or 5 years ‍♂️
  19. D

    Headers/fastners

    FWIW- I usually source all of my oddball studs and nuts through McMaster-Carr they have a wide selection of both and you can choose from several different alloys and grades for each, and they don’t gouge you on shipping. Good luck I’d be interested in what parts you use for future reference
  20. D

    New member from Montana, '81 C10 longbed, 250 6 cylinder

    welcome from south Louisiana, I’ve got the same truck but is a 75 C10 I love my 250 I6 motor with a sm 465 behind it, not a speed demon by any means but will pull hell off the cross, have thought about a V-8 upgrade but not likely. Good luck with your project
  21. D

    Sea Foam

    I use the BG brand 44K for over 30 years in gasoline and diesel engines on my old truck which was diesel I would put it in the fuel filter every time I change the oil and have never had any fuel related problems good stuff fwiw
  22. D

    Hello from Central Louisiana

    welcome from south Louisiana, good luck with your project the things you can learn from this group of guys and gals is priceless, not just the questions you ask and are usually answered quickly but just the general knowledge of the people in all of the posts has definitely helped me when I was stuck
  23. D

    USA1 Industries

    I’m done with them, you have to get in touch with them to even find out that your order is back ordered without an ETA, and the fact they charge you immediately and keep your money tied up instead of waiting to charge you when and if they ship your order
  24. D

    What fluid and capacity in 85 Chevy k10 manual 4-speed ?

    I just replaced the shift forks and put a kitin the top cover and I put exactly 4 quarts in mine, make sure it’s the 80-90wt GL-4 from what I’ve read and heard that the GL-4 is better because of the brass synchronizers in the internal parts, just my 2 cents worth
  25. D

    Looking for a shift knob.

    Go to SickSpeed.com that’s where I got mine to replace the shift knob for my sm465 I had it with the L-1-2-3-R just go to that website and you can pick from several different options and can get just about anything you want for whatever particular pattern you have good luck to you

Latest posts

Forum statistics

Threads
44,435
Posts
957,894
Members
36,802
Latest member
mcflurry
Top