Search results

  1. 7

    Temp gauge posts? Which is which?

    I need to direct wire this temp gauge, but need to know which post is ground, which is 12 volts, which is temp sensor…? this issue standard’73 - ‘80 something temp gauge. any direction much appreciated!
  2. 7

    'Diesel rattle' in my 350...?

    @Rusty Nail Here are a couple of pics from driving it into the office this morning; just for you :-)
  3. 7

    'Diesel rattle' in my 350...?

    Hey @Rusty Nail... as my old pop's would say "a picture is worth a thousand words"... but that was 40 years ago... what are comparable videos worth? Concerning '7900_Blazer'... I cannot remember why I picked that username. Back almost 20 years ago I had an '86 Jeep CJ, and then upgraded to a...
  4. 7

    'Diesel rattle' in my 350...?

    Water-pump installed after work, 1st drive for it in years… no noise and ran pretty good. thanks for everyone’s help!
  5. 7

    'Diesel rattle' in my 350...?

    Here are two videos… the only difference is taking off the belt. Thanks @Matt69olds #1: https://youtube.com/shorts/89g_78ldlgw?feature=share #2: https://youtube.com/shorts/733GzhI8wkI?feature=share
  6. 7

    Wiring 'factory' gauges 'directly'???

    One of the things that helped me the most was using the continuity feature on my multi-meter and a long 18 gauger wire with two alligator clips. My multimeter has a tone it emits when you have continuity clipping the alligator clip to one end, then cliping the other end to one of the leads on...
  7. 7

    Options for a ‘75 GMC Jimmy grill?

    Thanks for the info... that at least gives me an option. I have a salvage yard grill - clearly though NOT from one of those models so I'd have to fab some mounting hardware.... not too difficult but will take time which I'm running out of.... (have multi-blazer trip planned to the mountains in...
  8. 7

    Wiring 'factory' gauges 'directly'???

    The tach conversion kit on LMC is for '78-'87 - and I think there are some specific models (mine included) for which there are some issues between volts and amps, so I opted not to spend the $300. The $899 (actually $999 now that go look) is for a complete gauge cluster set from LMC (other...
  9. 7

    'Diesel rattle' in my 350...?

    Thanks for your help. Truck probably had some 'old' gas... but I put 10 gallons or so of premium in it the first time I was able to drive it a few miles as a test (4 days or so ago). No, it doesn't 'diesel' when shutting off the engine. Yes, I can grab a video this evening and post the link...
  10. 7

    'Diesel rattle' in my 350...?

    Not sure how to describe the 'rattle' I'm hearing coming from, I believe, the front of the engine at idle - not a consistent rattle. The rattle does not 'come and go'... but also is not consistent - so not something like rubbing as the engine turns.... Again, a bit of backstory... bought the...
  11. 7

    Harmonic Balancer - super weird (at least to me)

    Did I have any issues with my fuel pump 'in context' of replacing the motor mounts? No issues at all - did everything from underneath - slid the old ones out, and the new ones in.
  12. 7

    Wiring 'factory' gauges 'directly'???

    Looks awesome!!!
  13. 7

    Wiring 'factory' gauges 'directly'???

    That's a great question. I really don't like driving without a tachometer, and I don't like the tach's strapped to the column... so I only had two options: 1. spend $899 or so to buy a complete aftermarket gauge cluster 2. or retro-fit mine... - specifically, moving the fuel gauge to where the...
  14. 7

    Options for a ‘75 GMC Jimmy grill?

    As the subject note: I am in need of a 1975 GNC Jimmy grill, but appears nobody makes them any longer. I’ve found ‘73-‘74’s… an later models but no ‘75 grills. it seems the mounting holes are unique for the ‘75 and ‘76??? Anyone here with a solution by chance or options to mount a Chevy grill?
  15. 7

    Wiring 'factory' gauges 'directly'???

    yes, fuel gauge and temp gauge are next to each other. The gauges share a mounting post /screw that holds them into the plastic gauge cluster.
  16. 7

    Wiring 'factory' gauges 'directly'???

    Actually I didn’t get it to work. it’s a ‘75 Blazer; direct wired as described below. Bench testing it. - Drivers side post connected to temp sensor - Opposite side post to 12 volts - Bottom post connected to ground - Second ground connected to the temp sensor itself (to simulate grounding to...
  17. 7

    Wiring 'factory' gauges 'directly'???

    I figured it out… the gauge was bad…
  18. 7

    Wiring 'factory' gauges 'directly'???

    Is there anyone that has the experience and can tell me explicitly how to BENCH TEST a stock GM temp gauge an temp sensor? I have not been able to find a single diagram showing how to do this. specifically I need to know the following: 1. which gauge post is 12+ 2. Which gauge post is for...
  19. 7

    Ticking sound from distributor...?

    Dana 60's are so difficult to come by - at least around here.... I've looked and looked. I finally found one in a salvage yard but out of the 6000 or so vehicles in his yard, the owner didn't want to part that vehicle - so still on the hunt but I'm tired of working on it and want to be able to...
  20. 7

    Ticking sound from distributor...?

    AuroraGirl, It only arc'd like that for a total of probably 5 or 6 minutes... The whole truck is basically pieced together so I'm watching and listening for a lot. As I mentioned in another thread (harmonic balancer issue). I've replaced every body panel, floors; upgrade to a 1 ton axle in...
  21. 7

    Ticking sound from distributor...?

    Fixed… Even though the original coil did not have the ground post adapter, the new coil requires it. Simple fix. Much thanks to @AuroraGirl !!!
  22. 7

    Ticking sound from distributor...?

    The original coil did not have a middle ground post connected to the coil outer edge. The new coil indicated the middle ground post was for ‘early models’, so I did not install the middle ground post. Maybe that’s the problem??? Is that supposed to be installed in a ‘75?
  23. 7

    Ticking sound from distributor...?

    Thanks everyone for your help. I went ahead and replaced all the plug wires… still ticking. I waited till almost dark in hopes of seeing an arc. Took the cover off of the coil to see if I might see anything. Sure enough it is arcing all over place across the coil posts. This is clearly the...
  24. 7

    Ticking sound from distributor...?

    Plug wires ‘look’ good but were on the truck when I bought it. ticking sounds coming from the distributor though… but are you think one or more is shorted at the distributor?
  25. 7

    Ticking sound from distributor...?

    I replaced the coil before ever starting it, ( see the original post) once I saw that shorted wire… still ticks… with the new coil, new distributor cap and new seal… has to be something else.

Forum statistics

Threads
44,420
Posts
957,285
Members
36,765
Latest member
pursleym9
Top