Search results

  1. RawkerStatus

    Steering gear rebuild - FAIL

    My pump started leaking at the shaft seal, bearings went out on it after driving 100 or so miles after it blew the sector shaft seal from a bad remaned gear box. i got the steering pump with the reservoir, figure im already messing with changing out the pulley why bother with one more thing.
  2. RawkerStatus

    Tuning for altitude

    I'll be towing with the suburban, I'm thinking I might need to invest in efi to not deal with altitude change and fuel economy. On that note is the Holley Sniper kit better than the Edlebrock?
  3. RawkerStatus

    Tuning for altitude

    So weird thing, stumble is gone. Been in the 90s last few days. Dont know if that has anything to do with it.
  4. RawkerStatus

    Tuning for altitude

    It squirts pretty good. I'm wondering if it's the wrong profile for the weight of the vehicle.
  5. RawkerStatus

    Tuning for altitude

    My bad, so it's a 350 Blueprint engine. 220 intake, 224 exhaust with .50 duration at 114 degree lobe separation cam. 609 heads with the plugs gapped at .45 per Blueprints recommendation. I've gotten about a max of 14 inches of vacuum after tuning with the 64 jets. Theres a hesitation at take off...
  6. RawkerStatus

    Tuning for altitude

    This was driving 5 miles at 65, shutting down and pulling over and checking after a few minutes cooling down. Thanks I've been looking for a calculator. Blue Print recommended those plugs since they run the 906 heads.
  7. RawkerStatus

    Tuning for altitude

    So been messing with a holley carb, I'm at 4500 feet and the jets that came with it are for sea level. After research, they said to drop down a jet size for every 2k feet. The carb came with 66 jets. I went down to 64 jets and it ran better. Timing is at 32degrees total. What do you guys think...
  8. RawkerStatus

    Engine swap

    So started out with a 350 with a window. Pulled it. Started rebuilding the spare engine that came with it and quickly realized it wasn't going to be super reliable with out lots of work. Ended up with this from Blueprint
  9. RawkerStatus

    86 Suburban 350 Swap

    I went with a complete engine gasket kit. im going to plastigauge the mains and go from there. Summit has a crate engine for about $2500, go with FI and call it good.
  10. RawkerStatus

    86 Suburban 350 Swap

    Not sure. Would it even be worth it?
  11. RawkerStatus

    86 Suburban 350 Swap

    Cylinder 8 The heads
  12. RawkerStatus

    86 Suburban 350 Swap

    Cylinder 6 Cylinder 7
  13. RawkerStatus

    86 Suburban 350 Swap

    Cylinder 4 This one has the lip. Cylinder 5
  14. RawkerStatus

    86 Suburban 350 Swap

    Cylinder 2 Cylinder 3
  15. RawkerStatus

    86 Suburban 350 Swap

    So is this this trash? Cylinder 1 had carbon build and number 4 has a lip that my nail gets hung up on. Theres at least 2 more with lips but not enough to catch. Almost all water passages were completely clogged. Cylinder 1
  16. RawkerStatus

    86 Suburban 350 Swap

    I power washed the outside and then doused in WD40 before pics. It had been caked in oil and dirt before. My main concern is the bearing and pitting. No bronze from what I can tell from caps 3 and 4 from what I can tell.
  17. RawkerStatus

    86 Suburban 350 Swap

    Pulled a cap. How bad are these?
  18. RawkerStatus

    86 Suburban 350 Swap

    Started tearing apart my spare engine. Going to replace all seals, rebuild carb, new timing chain and swapping from TBI to Carb.
  19. RawkerStatus

    Barn Door Locking Mechanism

    So looks like I'm in the missing finger club. Need to find the finger and panel since its gone. after a bunch of reasearch its called a Door Lock Pawl. I can find it for the front doors but not the barn door. i might just order one and make it work... or just rig something up.
  20. RawkerStatus

    Barn Door Locking Mechanism

    I believe so. I'll take a picture when i get home. I remember checking doors and slid it into the locked position and kicking myself in the ass because now I have to crawl through the back to unlock it. I lived in Orange County, CA and I don't believe in unlocked doors.
  21. RawkerStatus

    Barn Door Locking Mechanism

    so looks like you can rig something up that goes on the cylinder to throw that plate up and down. Looks like you're just missing that part. doesnt seem like LMC has the part tho.
  22. RawkerStatus

    Barn Door Locking Mechanism

    awesome! now where do i get one? also any pics of the interior panels to that door? handles and such also. edit: Found the LMC website. seems like they dont sell the rod. Going to check out what all im missing. https://www.lmctruck.com/1973-91-chevy-gmc/csb-1973-91-cargo-components
  23. RawkerStatus

    Barn Door Locking Mechanism

    So I think I need the connecting rods and attachments from the cylinder to the mechanism.
  24. RawkerStatus

    Barn Door Locking Mechanism

    Anybody have pictures of the locking mechanismfor the barn door? Apparently someone took it apart and never fixed it. On that note, anyone know where to get the door panel and mechanism?
  25. RawkerStatus

    Engine code decoder

    The person who pulled it said it came out of a 96 Suburban. After looking at the 140893638 number it is pointing to a older model. The bolts are the same angle which is awesome considering i'll be able to use the stock manifold from the 86 engine.

Latest posts

Forum statistics

Threads
44,414
Posts
957,010
Members
36,738
Latest member
Tjreid
Top