Search results

  1. 16927

    ok, i'll bite. where is the reverse light switch

    The switch is on top of the steering column under the dash. It’s a reall joy to get to held on by two little screws. I’ve found they can be taken apart by bending the tabs and carefully removing the backing plate (careful of the spring) and clean all the old grease out of it and clean up the...
  2. 16927

    2-piece Long bed driveshaft

    received front yoke, thank you so much! mine is “egged” on one side where a u joint cap ground to dust at some time in its life. This one is in great shape and I can use the old one to help align the transmission putting it through the clutch ! Thanks again!!
  3. 16927

    2-piece Long bed driveshaft

    Yes I need the yoke please pm me and I’ll give you my address for shipping
  4. 16927

    2-piece Long bed driveshaft

    Still need the yoke that fits the three speed manual transmission if available.... let me know
  5. 16927

    2-piece Long bed driveshaft

    If the front yoke that fits in the three speed manual transmission is still available I can use that!
  6. 16927

    Custom deluxe emblem

    these won’t work for a 1981 1/2 ton
  7. 16927

    Custom deluxe emblem

    Looking for decent custom deluxe fender emblems for my 1981 custom deluxe. Thanks
  8. 16927

    Heater control

    Arrived today, thank you!!
  9. 16927

    Heater control

    Thanks custodian! I’ll let you know when I get it.
  10. 16927

    Heater control

    William fisher 9 north hunsberger lane Souderton pa 18964 Thanks!
  11. 16927

    Cleaning domestic coil

    Ok so here an update on my coil saga , I tried cleaning it with condenser coil cleaner, did some good but still smelled even after it dried off. So I ended up soaking it in apple cider vinegar...then neutralized in clean water and baking soda. that did the trick seems clean and odor free now. I...
  12. 16927

    Heater control

    Custodian, my heat lever is broken, maybe I can make one from two? What do you need for it ?
  13. 16927

    Heater control

    Hey guys, I need a heater control for a 1981 c10 without Ac. If anyone has a spare let me know. thanks
  14. 16927

    Catalytic converter

    Thanks for the heads up, I’m on the fence about it really I live in Pennsylvania and the truck is in a part of the state that does not require an emissions test. But I’ve been told that they look for the cat during inspection and will fail it if it is not there. But I’m thinking of putting...
  15. 16927

    Catalytic converter

    So the old catalytic converter is rotted out on my 1981 250 six cylinder truck. Has anyone replaced theirs with an aftermarket one and are they a direct replacement or are there exhaust mods that have to be done? What aftermarket converter did you use?? Thanks
  16. 16927

    Wanted 1981 non ac heater control

    Need heater control for my non ac 1981 C10 to replace my broken one.
  17. 16927

    Cleaning domestic coil

    Yes I would rather find a new one. Thanks for your kind offer but I’m not giving my coil away
  18. 16927

    Cleaning domestic coil

    Called THE TRUCK SHOP and they say their heater cores are aluminum....
  19. 16927

    Cleaning domestic coil

    Snoots, I looked at the link you sent and could only find oil coolers trans coolers electric fans.... I even tried to search “heater core” and got no results I must be missing something
  20. 16927

    Cleaning domestic coil

    Thanks Jeff I’ll give them a call tomorrow, and I’ll look up haydenauto
  21. 16927

    1981c10 non ac brass heater core

    Need original equipment style brass heater core for my non AC 1981 c10
  22. 16927

    Cleaning domestic coil

    Thanks Jeff, right now I’m looking for a heater core not a radiator, but radiator will be next Thanks
  23. 16927

    Cleaning domestic coil

    My very first concern is function. I want heat and defrost to work... my next concern is quality/durability, I don’t want to replace it in a short time the original one is 40 years old and does not leak but I have it out and found mice had made a huge nest against it partially blocking part of...
  24. 16927

    Cleaning domestic coil

    I’m thinking aluminum is cheaper to manufacture and it can’t be repaired like an old brass one... so you have to get a new one. I’ve heard people say that the aluminum transfers heat better but I’ve also heard they don’t heat as well .... some love them some hate them.... seems to be mixed...
  25. 16927

    Paint code Question

    On my 81C10 the glove box sticker tells you what the options and paint code is mine is 43p emerald green no idea what the P stands for anyone know?

Latest posts

Forum statistics

Threads
44,411
Posts
956,917
Members
36,732
Latest member
blackmfcowboy
Top